Datasheet

POE-151
2
Connecting to IEEE 802.3af devices
Due to the capability of IEEE 802.3af standard, the POE-151 can directly connect with any IEEE 802.3af end-nodes like wireless access point, IP phones
and Internet camera which support IEEE 802.3af In-line Power over Ethernet port.
IEEE 802.3af Injector and Splitter Installation
For a place hard to nd the power inlet, the POE-151 and POE-151S-5V/9V/12V, as a pair, should provide the easiest way to power your Ethernet devices
such as PLANET ICA-110, Internet camera on the ceiling, or WAP-4000, wireless access point that is installed on the top of the building. It’s the same with
the VIP-153PT, IP phone used in ofce or home.
Applications
Switch
Wireless AP
100 meters
DC DC
Power
Data
Power
Data
PoE
Power
Data
POE-151 POE-151S
Power Line (AC)
AC
100Base-TX UTP
PoE
100Base-TX UTP with PoE
Switch
100 meters
PoE
Power
Data
PoE IP Camera
POE-151
Power
Data
AC
Power Line (AC)
AC
100Base-TX UTP
PoE
100Base-TX UTP with PoE
Specications
Model POE-151
Hardware version version 2
Ethernet Connector 2 x RJ-45( 1 for data + DC out, 1 for data in)
Ethernet Data rate 10/100Mbps( vary on Ethernet device attached)
Input voltage DC 48V, 0.4A
Number of devices can be powered 1
Ethernet cable TIA/EIA-568, Category 5/5e cable
LED indicator 1 x power, 1 x POE ready / in-use
Dimensions (W x D x H) 73 x 55 x 24 mm
EMI FCC Class B, CE mark
Standard Compliance
IEEE 802.3 Ethernet,
IEEE 802.3u Fast Ethernet,
IEEE 802.3af Power over Ethernet.