Datasheet

IEEE 802.3af Power Over Ethernet Injector

Key Feature

Data Sheet

For the cost saving and power management purpose, PLANET releases a

new 10/100/1000Mbps Power over Ethernet Injector POE-152.

The POE-152 is an IEEE 802.3af Power over Ethernet Injector which

provides DC 48V over Ethernet cables. The POE-152 IEEE 802.3af Power

over Ethernet Injector inserts DC Voltage into Cat.5 cable, allowing the

cable between the Injector (POE-152) and Splitter (POE-152S-5V/12V) to

transfer data and power simultaneously. The maximum distance between

the Injector (POE-152) and Splitter (POE-152S-5V/12V) is 100 meters. With

POE-152 being installed, it combines the Ethernet digital data with power

over the twisted pair cables as an IEEE 802.3af Power over Ethernet

Injector. And the IEEE 802.3af Power over Ethernet splitter shall separate

the digital data and the power into two outputs.

Unlike existing Power over Ethernet Injector, the POE-152 also provides

1000Mbps Gigabit Ethernet connection ability, except the 10/100Mbps

Fast Ethernet connection ability.

With IEEE 802.3af Power over Ethernet devices installed, the system

administrator only has to use a single RJ-45 Ethernet cable to carry both

power and data to each device. Besides, to connect through POE-152 and

POE-152S-5V/12V, you could also have benefits which includes cost saving,

easy for networking planning and higher reliability. Upon any IEEE 802.3af

devices installed, the POE-152 or together with POE-152S-5V/12V can

make the connection while migrating or splitting the power and the

Ethernet digital packets, such as connecting the POE-152 to an IEEE

802.3af complied devices, AP or IP phone.

POE-152

• Complies with IEEE 802.3af Power over Ethernet, IEEE 802.3 /

802.3u / 802.3ab 10/100/1000Base-T

• Provides DC 48V power over RJ-45 Ethernet cable to device with

Ethernet port

• LED indicators power input indication

• Distance up to 100 meters

• Auto-detect of POE IEEE 802.3af equipment and devices from being

damaged by incorrect installation

• Works with EIA568, category 5, 5e or 6 ,2/4-pair cables for 10Base-T

or 100Base-TX and 1000Base-T

• EMI standards complies with FCC, CE class B

PAGE 1
POE-152 IEEE 802.3af Power Over Ethernet Injector Key Feature • Complies with IEEE 802.3af Power over Ethernet, IEEE 802.3 / 802.3u / 802.3ab 10/100/1000Base-T • Provides DC 48V power over RJ-45 Ethernet cable to device with Ethernet port For the cost saving and power management purpose, PLANET releases a • LED indicators power input indication new 10/100/1000Mbps Power over Ethernet Injector POE-152. • Distance up to 100 meters The POE-152 is an IEEE 802.
PAGE 2
POE-152 Specification Product IEEE 802.3af Power Over Ethernet Injector Model Ethernet Connector Ethernet Data Rate Input voltage Number of Device can be Powered Ethernet Cable LED Indicator Operating Environment Storage Environment Dimension (W x D x H) Weight Emission Standard Compliance POE-152 2 x RJ-45 (1 for data + DC out, 1 for Data in) 10/100/1000Mbps (vary on Ethernet device attached) DC 48V, 0.