User's Manual
– 1 – – 2 –
– 3 – – 4 –
1. Introduction
1.1 Package Contents
Thank you for purchasing our POE-152 IEEE 802.3af Power
over Ethernet Injector, your Power over Ethernet Injector
package shall contains following contents:
Check the contents of your package for following parts:
• PoweroverEthernetInjectorx1
• User'sManualx1
• PowerAdapterx1
If any of these pieces are missing or damaged, please
contact your dealer immediately, if possible, retain the
cartonincludingtheoriginalpackingmaterial,andusethem
against to repack the product in case there is a need to
return it to us for repair.
1.2 Key Features
• Comply with IEEE 802.3af Power over Ethernet, IEEE
802.3/802.3u10/100Base-TX/802.3ab1000Base-T
• Provide DC 48V power over RJ-45 Ethernet cable to
devicewithEthernetport
• Auto-detect of PoE IEEE 802.3af equipment, protect
devicesfrombeingdamagedbyincorrectinstallation
• WorkwithEIA568,category5,4-paircablesfor10Base-T
or100Base-TXand1000Base-T
1.4 Product Outlook
48V DC
Ethernet
Power over Ethernet Injector
IEEE 802.3af
PoE
PWR
Ethernet+DC
PoE-IEEE 802.3af
Ready
Power in-use
LED denition:
LED Color Function
Power Yellow
LightstoindicatethatthePOE-152
has power.
PoEready/
in-use
Green
Lightstoindicatetheportis
providing48VDCin-linepower.
1.3 Specication
Model POE-152
Ethernet
Connector
2xRJ-45
(1fordata+DCin,1forDataout)
EthernetDataRate
10/100/1000Mbps
(varyonEthernetdeviceattached)
InputVoltage DC48V,0.4A
Numberofdevice
canbepowered
1
EthernetCable TIA/EIA-568,Category5/5e/6cable
LEDIndicator 1xpower,1xPoEready/in-use
Dimension
(WxDxH)
73x55x24mm
EMI FCC Class B, CE mark
Standard
Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE802.3abGigabitEthernet
IEEE 802.3af Power over Ethernet
(PSE)
RJ-45Power
Insertion Pair
Pair1,2,3,6(End-Span)
2. Hardware Installation
This product provides three different running speeds –
10Mbps, 100Mbps and 1000Mbps in the same device
and automatically distinguishes the speed of incoming
connection.
This section describes the hardware features of POE-152.
BeforeconnectinganynetworkdevicetothePOE-152,read
this chapter carefully.
2.1 Before Installation
Before your installation, it is recommended to check your
network environment. If there is any IEEE 802.3af devices
need to power on, the POE-152 can provide you a way
to supply power for this Ethernet device conveniently and
easily. The POE-152 equips with an AC-DC adapter with
DC 48V input and injects thisDC power intothepinof the
twistedpaircable(pair1,2andpair3,6).
If there is very difcult to nd a power socket for AC-DC
Adapter of your non IEEE 802.3af networked device, the
POE-152 and POE-152S can provide you a way to supply
DCpowerforthisEthernetdeviceconvenientlyandeasily.
Note
The POE-152 and POE-152S can be installed
in pair.However,the useof third-party device
is allowed if the device complied with IEEE
802.3afstandard.