Datasheet

POE-161
2
Cost effective and Easy Cabling Installation
With IEEE 802.3at Gigabit High Power over Ethernet devices installed, the system administrator can use only one single RJ-45 Ethernet cable to carry
both power and data to each device. Besides, by connecting to the high power PoE splitter POE-162S, the POE-161 can offer benets of cost saving, easy
networking planning and high reliability. Upon the installation of IEEE 802.3at compliant devices, the POE-161, when functioning with the POE-162S, can
keep the connection while migrating or splitting the power and the Ethernet digital packets. It thus reduces cables, eliminates the need for dedicated electrical
outlets on the wall, ceiling or any unreachable place, and most of all, reduces installation time. The high Power over Ethernet solution frees the Security IP
Camera and wireless AP deployment from restrictions of power outlet locations.
Connection to IEEE 802.3at Compliant Devices
With its capability of IEEE 802.3at Power over Ethernet, the POE-161 can directly connect with any IEEE 802.3at end-nodes like PTZ (Pan, Tilt & Zoom)
network cameras, PTZ Speed Dome, color touch-screen Voice over IP (VoIP) telephones, multi-channel wireless LAN access points and other network
devices which support IEEE 802.3at Power over Ethernet.
Applications
Switch
100 meters
PoE
Power
Data
802.3at PoE
PTZ Speed Dome
POE-161
Power
Data
AC
1000Base-T UTP
PoE
1000Base-T UTP with PoE
Power Line (AC)
AC
The IEEE 802.3at Injector and Splitter Installation
For a place which is hard to nd the power inlet, the POE-161 and POE-161S operate as a pair to provide the easiest way to power your Ethernet devices
which need high power input, such as PTZ (Pan, Tilt & Zoom) network cameras, PTZ Speed Dome, color touch-screen Voice over IP (VoIP) telephones, and
multi-channel wireless LAN access points installed on the top of the building or used in enterprise ofce or home.
Switch
POE-161SPOE-161
100 meters
Power
Data
Power
Data
PoE
Power
Data
AC
DC
PTZ Camera
1000Base-T UTP
PoE
1000Base-T UTP with PoE
Power Line (AC)
AC
DC
Power Line (DC)