Datasheet

POE-163
2
Power Side LAN Connector Side
Top Side LED
Quick and Easy Cabling Installation for PoE Network Deployment
Complying with both 802.3af and 802.3at PoE+ standards, the POE-163 allows users to exibly deploy standard and high powered devices to transfer data
and power simultaneously through one Ethernet cable for up to 100 meters. The POE-163 frees the security IP camera and wireless AP deployment from
restrictions of power outlet locations and the additional AC wiring. It thus reduces cables and eliminates the need for electrical outlets on the wall, ceiling or
any unreachable place, and most of all, it reduces installation time.
All-in-One and Compact-size Design
With concepts of "Easy to install”, “Plug and Play” and "Simple troubleshooting" for business and home users, the POE-163 is an all-in-one, single-port PoE+
injector with internal power supply. In the compact size housing, the POE-163 provides one 100-240V AC input socket on its front panel, two LEDs (System
POWER and PoE ACTIVE ) on the top side and two RJ45 ports (POE port and LAN port) on the rear panel. Simply plug in the Ethernet cables and power
cord, and the POE-163 is ready to provide high-speed network communication and high power PoE+ injector functions simultaneously with no need of
software conguration.
100~240V AC
PoE IP Camera
PoE Wireless AP
PoE Splitter
Data
Power
10/100/1000Mbps Ethernet Switch
RJ45 UTP Cable
Power
Data
Power
Data
POE-163
Powered Device