Datasheet

POE-172
2
All-in-One and Compact Size Design
With concepts of "Easy to install”, “Plug and Play” and "Simple troubleshooting" for business and home users, the POE-172 is an all-in-one, single-port
PoE+ injector with internal power supply. In the compact size housing, the POE-172 provides one 100-240V AC input socket on its front panel, two LEDs
(System POWER and PoE ACTIVE) on the top side and two RJ45 ports (PoE port and LAN port) on the rear panel. Simply plug in the Ethernet cables and
power cord, and the POE-172 is ready to provide high-speed network communication and ultra power PoE injector functions simultaneously with no need of
softwareconguration.
60 watts of Power over 4-pair UTP
The POE-172 and POE-171S Ultra PoE solutions use the same cabling standard such as IEEE 802.3at/af PoE. Instead of delivering power over 2-pair
twisted UTP – be it end-span (Pins 1, 2, 3 and 6) or mid-span (Pins 4, 5, 7 and 8), it provides the capability to source up to 60 watts of power by using all
the four pairs of standard Cat. 5e/Cat. 6 Ethernet cabling. In the new 4-pair system, two PSE controllers will be used to power both the data pairs and the
spare pairs.
10/100/1000Mbps
Data
Cat 5E: 4-pair UTP
60W
Power over Ethernet
End-span
Mid-span
10/100/1000Mbps Data
100~240V AC IN
12V/19V/24V
Ultra PoE SplitterUltra PoE Injector
PoE Standard
IEEE 802.3af (802.3at Type 1) IEEE 802.3at (802.3at Type 2) Ultra PoE (POE-172)
Maximum Power delivered
by PSE
15.4 watts 30 watts 60 watts
Power Available at PD 12.95 watts 25.5 watts 50 watts
Voltage Range 48V 50~57V 56V
Twisted Pair Used 2-pair 4-pair
Supported Modes End-span or Mid-span End-span + Mid-span
Supported Cabling Cat. 3/5/5e/6 Cat. 5e/6
Power Side
LAN Connector Side
Top Side LED