Datasheet

Data Sheet
1
SGS-6340-20S4C4X
1
Layer 3 20-Port 100/1000X SFP + 4-Port Gigabit TP/
SFP + 4-Port 10G SFP+ Stackable Managed Switch
Physical Ports
• 24 100/1000BASE-X mini-GBIC/SFP slots
• 4 10/100/1000BASE-T RJ45 copper ports, shared with port-
21 to port-24
• 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-
SX/LX/BX SFP
• RJ45 to DB9 console interface for switch basic management
and setup
IP Stacking
• Connects with stack member via both Gigabit TP and SFP
interfaces
• Single IP address management, supporting up to 24 units
stacked together
IP Routing Features
• Supports maximum 128 static routes and route
summarization
• Supports dynamic routing protocol: RIP and OSPF
Layer 2 Features
• Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab,
IEEE 802.3z Gigabit Ethernet standard
• Supports auto-negotiation and half-duplex/full-duplex modes
for all 10BASE-T, 100BASE-TX and 1000BASE-T ports
• Auto-MDI/MDI-X detection on each RJ45 port
• Preventspacketlossowcontrol
IEEE802.3xpauseframeowcontrolinfull-duplexmode
Back-pressureowcontrolinhalf-duplexmode
• High performance Store-and-Forward architecture, broadcast
storm control, port loopback detect
• 16K MAC address table, automatic source address learning
and aging
• Supports VLAN
IEEE 802.1Q tag-based VLAN
GVRP for dynamic VLAN management
Up to 256 VLANs groups, out of 4041 VLAN IDs
Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad)
supported
Private VLAN Edge (PVE) supported
GVRP protocol for Management VLAN
Protocol-based VLAN
MAC-based VLAN
Powerful Solution for All Long-Reach Networks
PLANET SGS-6340-20S4C4X is a Layer 3 Stackable Managed Gigabit Switch that
provides high-density performance by its Layer 3 Gigabit static routing with 10Gbps
uplink and multiple SFP fiber interfaces delivered in a rugged strong case. The
administrator can flexibly choose the suitable SFP/SFP+ transceiver according to the
transmission distance or the transmission speed required to extend the 10G network
efficiently. Besides, with 128Gbps switching fabric, the SGS-6340-20S4C4X can
handle extremely large amounts of data in a secure topology linking to backbone
or high capacity servers for ISP and enterprise VoIP, video streaming, and multicast
applications.
AC and DC Redundant Power to Ensure Continuous Operation
The SGS-6340-20S4C4X is equipped with one 100~240V AC power supply unit and
one additional -48 ~ -60V DC power supply unit for redundant power supply installation.
A redundant power system is also provided to enhance the reliability with either AC or
DC power supply unit. The redundant power system is specifically designed to handle
the demands of high-tech facilities requiring the highest power integrity. Furthermore,
with the -48 ~ -60V DC power supply implemented, the SGS-6340-20S4C4X can be
applied as the telecom level device.
24 x 100/1000BASE-X SFP Slot
4 x Combo Interface 4 x 1/10G SFP+ Slot
RJ45 Type Console
4 x 10/100/1000BASE-T RJ45 Port
AC Power Input
Grounding DC Power Input

Summary of content (8 pages)