Manualshelf

SGS-6340 Series Quick Guide

ManualsBrandsPLANET Technology ManualsStandard SwitchesLayer 3 20-Port 100/1000X SFP 4-Port Gigabit TP/SFP 4-Port 10G SFP Stackable Managed Switch
12345678910
10
7.Setting100BASE-FXforSFPPort(SGS-6340-
20S4C4XOnly)
The Managed Switch supports both 1000BASE-X and 100BASE-FX SFP
transceiver by manual setting and the default SFP port speed is set to 1000Mbps.
To establish the ber connection with 100BASE-FX SFP transceiver, the following
commandcongurationisrequired:
SGS-6340-20S4C4X#cong
SGS-6340-20S4C4X(cong)#interface ethernet 1/0/1-20
SGS-6340-20S4C4X(cong-if-port-range)#speed-duplex force100-fx
module-type auto-detected
SGS-6340-20S4C4X(cong-if-port-range)#exit
SGS-6340-20S4C4X(cong)#interface ethernet 1/0/21-24
SGS-6340-20S4C4X(cong-if-port-range)#media-type ber
SGS-6340-20S4C4X(cong-if-port-range)#speed-duplex force100-fx
module-type auto-detected
SGS-6340-20S4C4X(cong-if-port-range)#
Figure 7-1 Setting 100BASE-FX Screen