SGS-6340 Series User Manual

User’s Manual of SGS-6340 seriesT
Supports the RADIUS authentication for IPv4/IPv6 Telnet user name and
password
Supports IPv4/IPv6 SSH
The right configuration for users to adopt RADIUS server’s shell management
Supports CLI, console, Telnet
Supports SNMPv1, v2c and v3
Supports Security IP safety net management function: avoid unlawful landing a
t
non-restrictive area
Supports Syslog server for IPv4 and IPv6
Supports TACACS+
Layer 3 Function
IP Interface
Per VLAN, up to 128 Per VLAN, up to 64
Routing Protocol
IPv4/IPv6 static routing
RIPv1/v2
OSPFv1/v2
IPv4/IPv6 static routing
RIPv1/v2
OSPFv1/v2
Routing Table
128 64
Layer 2 Function
Port Configuration
Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable/enable
Bandwidth control on each port
Port loopback detect
Port Status
Display each port’s speed duplex mode, link status, flow control status and
auto negotiation status
VLAN
802.1Q tagged based VLAN, up to 256 VLAN groups
802.1ad Q-in-Q (VLAN stacking)
GVRP for VLAN management
Private VLAN Edge (PVE) supported
Protocol-based VLAN
MAC-based VLAN
IP subnet VLAN
Bandwidth Control
TX/RX/both
Link Aggregation
IEEE 802.3ad LACP/static trunk
Supports 128 groups with 8 ports per trunk group
QoS
8 priority queues on all switch ports
Supports strict priority and Weighted Round Robin (WRR) CoS policies
Traffic classification:
- IEEE 802.1p CoS/ToS
- IPv4/IPv6 DSCP
1-14