SGS-6340 Series User Manual

48.2 SSL Configuration Task List
1. Enable/disable SSL function
2. Configure/delete port number by SSL used
3. Configure/delete secure cipher suite by SSL used
4. Maintenance and diagnose for the SSL function
1. Enable/disable SSL function
Command Explanation
Global Mode
ip http secure-server
no ip http secure-server
Enable/disable SSL function.
2. Configure/delete port number by SSL used
Command Explanation
Global Mode
ip http secure-port <port-number>
no ip http secure-port
Configure port number by SSL used, the” no
ip http secure-port” command deletes the
port number.
3. Configure/delete secure cipher suite by SSL used
Command Explanation
Global Mode
ip http secure-ciphersuite
{des-cbc3-sha|rc4-128-sha|
des-cbc-sha}
no ip http secure-ciphersuite
Configure/delete secure cipher suite by SSL
used.
4. Maintenance and diagnose for the SSL function
Command Explanation
Admin Mode
show ip http secure-server status
Show the configured SSL information.
debug ssl
no debug ssl
Open/close the DEBUG for SSL function.
48-118