Quick Guide

ManualsBrandsPLANET Technology ManualsCellular GatewayVehicle 4G LTE Cellular Wireless Gateway with 5-Port 10/100TX (1-SIM Card Slot, 802.11n, GPS, -25~65 degrees C)

– 1 – – 2 –

– 3 – – 4 –

1. Package Contents

Thank you for choosing PLANET Vehicle 4G LTE Cellular Gateway.

Open the box of the Cellular Gateway and carefully unpack it. The

box should contain the following items:

 VCG-1500WG-LTE x 1

 Quick Installation Guide x 1

 4G LTE Antenna x 1

 2.4G Wi-Fi Antenna x 2

 GPS Antenna x 1

 Ethernet Cable x 1

 Console Cable x 1

 Mounting Kit x 1

 Power Kit x 1

 Antenna Dust Cap x 4

 Copper Dust Cap x 6

Note

If there is any item missing or damaged, please

contact the seller immediately.

2. Physical Introduction

 Front Panel

PWR WiFi 3G 4G Internet

Ejector SIM

TF1 TF2

WiFiWiFi

VCG-1500WG-LTE

Vehicle 4G LTE Cellular Wireless Gateway

 Rear Panel

3G/4G

GPS

Reset

DC 6~32V USB

Console

4 3 2 1 WAN

BAT

GND

ACC

GND

ACT

LNK

LED Color Function

PWR Red

Lights to indicate that the gateway is

operating.

WiFi Blue

Lights to indicate that the Wi-Fi is working.

The Wi-Fi is enabled by default.

3G Blue

Lights to indicate that the SIM card is

detected via 3G.

4G Blue

Lights to indicate that the SIM card is

detected via 4G.

Internet Blue

Lights to indicate that the gateway is

connecting to the Internet.

Button Function

Ejector This button is used to eject the SIM card adapter.

Reset

This button is used to restore all the factory default

settings. Please hold the reset button for about 5

seconds to load default.

Interface Description

Power Jack

The standard 4-pin vehicle power jack comes with

the input power of 6-32V DC.

Use the power adapter included in the package or

connect to vehicle battery directly.

SIM Slot Insert the SIM card adapter with SIM card.

TF1/TF2

Slot

Store broadcast advertisements for Wi-Fi

authentication.

USB Port Connect with external storage.

Console

Port

The port is for testing or debugging.

3. Hardware Installation

Step 1. Insert SIM card adapter into gateway SIM card slot.

Note

A mini card with LTE and WCDMA subscription.

Step 2. Connect 4G LTE antenna, Wi-Fi antennas and GPS antenna

Step 3. Power on the gateway.

Step 4. Connect LAN 2

parameters and desired function.

Note

1. It is necessary to power off the gateway before

you insert or remove the SIM card.

2. Before inserting the SIM card adapter into SIM

slot, please make sure the SIM card with metal

point is facing down.

Summary of content (2 pages)

PAGE 1
. Package Contents 2. Physical Introduction Thank you for choosing PLANET Vehicle 4G LTE Cellular Gateway.  Front Panel Open the box of the Cellular Gateway and carefully unpack it. The box should contain the following items: Vehicle 4G LTE Cellular Wireless Gateway VCG-1500WG-LTE WiFi PWR WiFi 3G 4G Internet  VCG-1500WG-LTE x 1 Ejector SIM TF1 WiFi TF2  Rear Panel  Quick Installation Guide x 1  4G LTE Antenna x 1 ACT LNK BAT ACC GND GND  2.
PAGE 2
4. Web Management The following shows how to start up the Web Management of the Cellular Gateway. connection. Please make sure the manager PC must be set to the same IP subnet address. For example, the default IP address of the Cellular Gateway is 192.168.1.1, then the manager PC should be set to 192.168.1.x (where x is a number between 2 and 254), and the default subnet mask is 255.255.255.0 Connect LAN 2 port with PC RJ45/UTP Cable VCG-1500WG-LTE PC / Workstation with Web Browser 192.168.1.