Quick Guide

– 6 – – 7 –
Default IP Address: 192.168.1.1
Default port number: 9999
Default Username: admin
Default Password: admin
3. When you log in the Web Interface successfully, the main page
appears as the following picture shows.
4. Web Management
The following shows how to start up the Web Management of the
Cellular Gateway.
connection. Please make sure the manager PC must be set to the
same IP subnet address.
For example, the default IP address of the Cellular Gateway is
192.168.1.1, then the manager PC should be set to 192.168.1.x
(where x is a number between 2 and 254), and the default subnet
mask is 255.255.255.0
PC / Workstation with Web
Browser 192.168.1.x
RJ45/UTP Cable
IP Address:192.168.1.1
VCG-1500WG-LTE
IP Management Diagram
 Logging in to the Cellular Gateway
1. Use Internet Explorer 8.0 or above Web browser and enter
default IP address http://192.168.1.1:9999 to access the Web
interface.
2. After entering the http://192.168.1.1:9999 the following
dialog box will appear. Please enter the default user name and
password “admin”.
5. Further Information
The above steps introduce the simple installations of the
VCG-1500WG-LTE. For further details on the installation of the
cellular gateway, please refer to the user manual which can be
downloaded from PLANET website.
https://www.planet.com.tw/en/support/downloads?method=category
&c1=network-security&p=vcg-1500wg-lte&type=3
If you have further questions, please contact the local dealer or
distributor where you purchased this product or you can contact
PLANET directly at the following email address:
[e-mail]
EMQ-VCG1500WG-LTE_v1.1
– 5 –
Connect LAN 2
port with PC