User's Manual

User’s Manual of VCG-1500WG-LTE
15
 Reset Button
On the rear of the VCG-1500WG-LTE, the reset button is designed to reset the Vehicle Gateway to factory default.
Figure 2-3 Reset Button of VCG-1500WG-LTE
Reset Button
Function
> 5 sec: Factory Default
Reset the Vehicle Gateway to Factory Default configuration.
Vehicle Gateway will then reboot and load the default settings
shown below:
 Default username: admin
 Default password: admin
 Default IP address: 192.168.1.1
 Subnet mask: 255.255.255.0
2.1.2 LED Indications
The front and real panels’ LEDs indicate instant status related to system power, Wi-Fi, 4G and Internet. It helps monitor and
troubleshoot when needed.
 System
LED
Color
Function
PWR
Red
Lights
Indicates the system is working properly.
Wi-Fi
Blue
Lights
Indicates the Wi-Fi is working. The Wi-Fi is enabled by default.
3G
Blue
Lights
Indicates the SIM card is detected via 3G
4G
Blue
Lights
Indicates the SIM card is detected via 4G.
Internet
Blue
Lights
Indicates the system is connecting to the Internet.
 10/100BASE-TX Port Interfaces (LAN Port-1 to Port-4, WAN)
LED
Color
Function
Ethernet
Green
Blinking
LNK, indicates that the link is successfully established
Orange
Blinking
ACT, indicates that the port is operating at 100Mbps