User's Manual
Table Of Contents
User’s Manual of VCG-1500WG-LTE
16
2.1.3 Power Inputs
The 4-pin power connector on the rear panel of Vehicle Gateway is used for one DC power input. The power input range is from
6 to 32V DC. In the power kit, VCG-1500WG-LTE provides one power adapter and one power cable with 4-pin female power
jack. Please follow the steps below to insert the power wire.
1. Plug the 4-pin female power jack of the power cable into the power connector.
Figure 2-4: Plugging in the Power Input
2. Connecting power adapter with power cable.
Figure 2-5: Connecting Power Cable with Power Adapter
Except for the power adapter, the power cable also reserves two bare wires with positive
and negative poles so that the user can connect to the battery of the car.