User's Manual

User’s Manual of VCG-1500WG-LTE
20
3. QUICK CONFIGURATION
This chapter explains the procedure that you can install and configure the Gateway in a short time. Besides, it also contains
information about port connection options.
3.1 Inserting SIM Card into Gateway’s SIM Card Slot
3.2 Connecting Antennas
3.3 Connecting LAN 2 Port of Gateway with PC
Please connect the gateway and PC to the same switch. The default IP address of LAN 2 port is 192.168.1.1 and the port
number is 9999. In the PC, please make sure the manager PC must be set to the same IP subnet address.
For example, the default IP address of the gateway is 192.168.1.1, then the manager PC should be set to 192.168.1.x (where x
is a number between 2 and 254), and the default subnet mask is 255.255.255.0
Figure 3-3-1 Web Management
3.4 Logging in to the Vehicle Gateway
Use Internet Explorer 8.0 or above Web browser and enter default IP address http://192.168.1.1:9999 to access the Web
interface.
After entering the http://192.168.1.1:9999 the following dialog box will appear. Please enter the default user name and password
“admin”.
3.5 LED and System Status
When the gateway is working properly, the LED status should display as shown below: