User's Manual

User’s Manual of VCG-1500WG-LTE
22
4. BASIC CONFIGURATION
This section introduces the configuration and functions of the Web-based management.
4.1 WAN Configuration
Gateway dial-up configuration is the basic parameter of connecting wireless network.
Figure 4-1-1 Main Page
Object
Description
Calling Center Number,
Access Point Name,
Username and Password
Usually the information is default setting (refer to Appendix 5). Usually it doesn’t need to
revise it. If APN/VPND is used, it needs to type these information supplied by ISP to the
exact place.
PIN Code
If mobile UIM/SIM card is used to set a PIN code, please input it here.
Extra Initialization
Commands
It is usually blank here. If customer has any especial command, customer can input here.
The Way to Obtain IP
To obtain IP automatically, specify the local IP and specify the remote client’s IP. Default
situation is to obtain IP automatically; it is the IP address assigned by ISP when wireless
dial-up is made. If “Specify IP address” is selected, please input it according to ISP
supplied information. Otherwise, it can’t be online by dial-up. If ISP requires specifying
one kind, and the other one is obtaining automatically, please input 0.0.0.0.
1. PIN code can’t be input casually to avoid locking the card.
2. Please don’t input extra initialization command casually to avoid dial-up which is unavailable.
3. Please don’t specify IP casually unless it is required to do so by ISP, otherwise, online is