User's Manual

User’s Manual of VCG-1500WG-LTE
61
every hour: Set gateway online and offline time scope of the certain period every hour.
Note: need to confirm whether system time is correct or not
MIX mode
It is with the functions of SMS, PHONE and DATA wakeup. Once one is valid, it can
wake up the gateway
Note:
1. Command is without case-sensitive (including wakeup password), so once device
receives LAN host computer data, it disconnects TCP connection with LAN host
computer immediately and enters into monitor status again.
2. If selecting “Idle Time” only, without “force offline”, please confirm whether “keeping
online” rule has no data transmitting and receiving within “Idle Time”
SMS wakeup command format:
SMSPASSWD: password: command: parameter
Command and parameter：
REBOOT
Function：Restart gateway
Command：REBOOT
Parameter：none
Format：SMSPASSWD: xxxxxx (password): REBOOT
CONNECT
Function：gateway dial-up at the same time, log in and start to transmit the data
Command：CONNECT
Parameter：none
Format：SMSPASSWD: xxxxxx (Password): CONNECT
DNS
Function：set the main DNS and backup DNS of wireless gateway
Command：CONNECT
Parameter：none
Format：SMSPASSWD: xxxxxx (password): DNS:201.101.103.55:201101.107.55
Instruction：set the main DNS as 202.101.103.55, backup DNS is 202.101.107.55
DNS
Function：Eliminate DNS
Command：CLEAR
Parameter：none
Format：SMSPASSWD: xxxxxx (password):DNS:CLEAR
ACTMODE
Function：The device revised to be auto activation (default)；wireless gateway dial-up automatically after power on.
Command：AUTO