Quick Guide

– 5 –
– 6 –
5.FurtherInformation
For more information, please refer to the VGW series user
manual.
https://www.planet.com.tw/en/support/downloads?&method=ke
yword&keyword=VGW&view=2#list
If you have any other question, please contact the dealer
where you purchased this product or you can contact.
PLANET directly at the following email address:
[e-mail]
4. Installation Check
In this step, we should check VGW series when power is on.
But before this, you should ensure that all other things are
done (such as cable connection, and power connection).
Then you can refer to the following steps:
 Keep device power on, and check whether the power indi-
cator (PWR) is on or not. If so, it indicates that device’s
power is ready; otherwise, please check the connection of
the power plug or power adaptor.
 Check Ethernet port (WAN/LAN) LED status. When port LED
is blinking, it indicates that network is ready. Otherwise,
check network connection.
 Check phone port status LED. When device’s (Line) LED is
blinking at the time you pick up the phone and the phone
port LED is on, it indicates telephone port is ready, otherwise
check the telephone connection.