Quick Guide

[封底] [封面]
4 Installation Check
In this step, we should check VGW series when power is on.
But before this, you should ensure that all other things are
done (such as cable connection, and power connection).
Then you can refer to the following steps:
 Keep device power on, and check whether the power
indicator (PWR) is on or not. If so, it indicates that
device’s power is ready; otherwise, please check the
connection of the power plug or power adaptor.
 Check Ethernet port (WAN / LAN) LED status. When
port LED is blinking, it indicates that network is ready.
Otherwise, check network connection.
 Check phone port status LED. When device’s (Line)
LED is blinking at the time you pick up the phone and
the phone port LED is on, it indicates telephone port is
ready, otherwise check the telephone connection.
Further Information
For more information, please refer to the VGW series user
manual.
https://www.planet.com.tw/en/support/downloads?&meth
od=keyword&keyword=VGW-420&view=3#list
If you have any other question, please contact the dealer
where you purchased this product or you can contact
PLANET directly at the following email address:
[e-mail]