5-Port VPN Security Router VR-100 & VR-300 Series Quick Installation Guide 1
Table of Contents Chapter 1. Package Contents ...................................................................... 3 Chapter 2. Hardware Installation ................................................................. 5 2.1 Wireless Antennas Installation 5 2.2 SIM Card Installation 8 2.3 5G NR Antenna Installation 9 Chapter 3. Setup of the VPN Router ......................................................... 10 3.1 Requirements 10 3.2 Logging in to the VPN Router 10 Chapter 4.
CHAPTER 1. PACKAGE CONTENTS Thank you for purchasing PLANET VPN Router, VR-100 or VR-300 Series. The descriptions of these models are as follows: VR-100 VR-300 VR-300P VR-300W5 VR-300PW5 VR-300W6 VR-300PW6 VR-300W6A VR-300PW6A VR-300FW-NR 5-Port 10/100/1000T VPN Security Router Enterprise 5-Port 10/100/1000T VPN Security Router Enterprise 4-Port 10/100/1000T 802.
Open the box of the VPN Router and carefully unpack it. The box should contain the following items for each of the above models: VPN Router x 1 Quick Installation Guide (QR code) x 1 Power Cord x 1 Rubber Feet x 4 Rack-mounting Kit x 1 SFP Dust Cap x 1 (VR-300F/VR-300FP/VR-300FW-NR) Model Name 2.
CHAPTER 2. HARDWARE INSTALLATION Refer to the illustration and follow the simple steps below to quickly install your VPN router. 2.1 Wireless Antennas Installation Step 1: For wireless models, fasten the 2.4G/5G antennas to the 2.4G/5G antenna connectors. And you can bend the antennas to fit your actual needs. VR-300W/VR-300PW Series Rear View: VR-300FW-NR Rear View: Step 2: Place the VPN Router on desktop. Step 3: Keep enough ventilation space between the VPN Router and the surrounding objects.
The UTP Category 5e/6 network cabling with RJ45 tips is recommended. Step 5: Connect your VPN Router to internet. A. Connect one end of a standard network cable to the WAN port (port 5) on the front panel of the VPN router. B. Connect the other end of the cable to the xDSL/x PON modem/ONU LAN port or an upper layer port to outer network layer. If there is only one line connected to the outer network in your network environment, it is suggested that you use WAN port (port 5).
2.2 SIM Card Installation For VR-300FW-NR only A. Insert an ejector pin into the yellow button next to the tray to loosen the tray. B. Pull out the tray gently from the tray slot. Place the SIM card on the tray with the gold-colored contacts facing upwards. C. Insert the tray back into the tray slot.
2.3 5G NR Antenna Installation For VR-300FW-NR only Step 1: Connect 5G NR antennas to the 5G NR antenna extender.
CHAPTER 3. SETUP OF THE VPN ROUTER 3.1 Requirements Please confirm the following items before configuration: 1. Please confirm the network is working properly: It is strongly suggested to test your network connection by connecting your computer directly to ISP. 2. Suggested operating systems: Windows 7/8/10. 3. Recommended web browsers: Edge/Firefox/Chrome. 3.2 Logging in to the VPN Router Then refer to the steps to configure the VPN Router: Step 1.
The DHCP server of the VPN Router is enabled. Therefore, the LAN PC will get IP from the VPN Router. If user needs to set IP address of LAN PC manually, please set the IP address within the range between 192.168.1.2 and 192.168.1.254 inclusively, and assigned the subnet mask of 255.255.255.0. Step 2. The browser prompts you for the login credentials. (Both are “admin” by default.) Default IP address: 192.168.1.
Administrators are strongly suggested to change the default admin and password to ensure system security. Step 3. After entering the password, the main screen appears as shown in Figure 3-3. Figure 3-3: Web-based Main Screen of Cellular Gateway Now, you can use the Web management interface to continue the VPN Router management. Please refer to the user’s manual for more. Administrators are strongly suggested to change the default password and Wi-Fi SSID on the first login to safeguard system security.
CHAPTER 4. RECOVERING BACK TO DEFAULT CONFIGURATION IP address has been changed or admin password has been forgotten To reset the IP address to the default IP address “192.168.1.1” or reset the login password to default value, press the hardware-based reset button on the front panel for about 10 seconds. After the device is rebooted, you can log in the management Web interface within the same subnet of 192.168.1.xx.
CHAPTER 5. APPENDIX Appendix A: Default Setting Default IP Address 192.168.1.1 Default Login User Name admin Default Login Password admin Default DHCP Server On Default LAN Port Ethernet Ports 1~4 Default WAN Port Ethernet Port 5 Default SSID (2.4G) PLANET 2.
CHAPTER 6. FURTHER INFORMATION Thank you for purchasing PLANET VPN Router. The above steps introduce the simple configuration of the VPN Router. If you have other questions, please contact the local dealer where you purchased this product or you can contact PLANET directly at the following email address: support@planet.com.tw. Copyright PLANET Technology Corp. 2022. Contents are subject to revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp.
