Datasheet

VR-300P
2
Firewall Security
• Cybersecurity
• Stateful Packet Inspection (SPI) rewall
• Blocks DoS/DDoS attack
• Content Filtering
• MAC Filtering and IP Filtering
• NAT ALGs (Application Layer Gateway)
• Blocks SYN/ICMP Flooding
VPN Features
• IPSec/Remote Server (Net-to-Net, Host-to-Net), GRE, PPTP
Server, L2TP Server, SSL Server/Client (Open VPN)
• Max. Connection Tunnel Entries: 60 VPN tunnels,
• Encryption methods: DES, 3DES, AES, AES-128/192/256
• Authentication methods: MD5, SHA-1, SHA-256, SHA-384,
SHA-512
Networking
• Outbound load balancing
• Failover for dual-WAN
• High availability
• Captive Portal
• RADIUS Server/Client
• Static IP/PPPoE/DHCP client for WAN
• DHCP server/NTP client for LAN
• Protocols: TCP/IP, UDP, ARP, IPv4, IPv6
• Port forwarding, QoS, DMZ, IGMP, UPnP, SNMPv1,v2c, v3
• MAC address clone
• DDNS: PLANET DDNS, Easy DDNS, DynDNS and No-IP
Others
• Setup wizard
• Dashboard for real-time system overview
• Supported access by HTTP or HTTPS
• Auto reboot
• PLANET Smart Discovery utility/UNI-NMS supported
Scheduled Power Recycling
The VR-300P allows each of the connected PoE IP cameras or PoE wireless
access points to reboot at a specific time each week. Therefore, it will reduce the
chance of IP camera or AP crash resulting from buffer overow.
PoE
1000BASE-TX UTP with PoE
6 Watts 6 Watts 12 Watts 12 Watts
Total Consumption: 36 watts / hr
PoE
PoE PoE
PoE
Power
On
Power
On
Power
On
Power
On
5 PM8 AM
5 PM 8 AM
6 Watts 6 Watts 12 Watts 12 Watts
Save 24 watts / hr during off-business hours
PoE PoE
Total Saved = 10800watts / month
PoE PoE
Power
On
Power
Off
Power
Off
Power
Off
PD Alive Check
The VR-300P can be configured to monitor connected PD status in real time
via ping action. Once the PD stops working and responding, the VR-300P will
resume the PoE port power and bring the PD back to work. It will greatly enhance
the network reliability through the PoE port resetting the PD’s power source and
reducing administrator management burden.
PT PoE Camera
Ping Request
Ping Request
Check alive status for 3 times
Restart PoE device if without response
Ping Echo
No Response......
PD Alive!!
Step 1
Step 3
Step 2
Step 4
ON
PoE
ON
ON
PoE
OFF
PD Status
Good!!
Alarm Notification
Wi-Fi Deployments and Authentication with Simplied Management
The VR-300P also provides a built-in AP Controller, Captive Portal, RADIUS and a
DHCP server to facilitate small and medium businesses to deploy secure employee
and guest access services without any additional server. The VR-300 can offer a
secure Wi-Fi network with easy installation for your business.
Name
E-mail
Free-Wifi
Captive Portal