User's Manual

ManualsBrandsPLANET Technology ManualsNetwork SecurityEnterprise 4-Port 10/100/1000T 802.3at PoE + 1-Port 10/100/1000T VPN Security Router

Table Of Contents

Enterprise 5-Port 10/100/1000T VPN Security Router

VR-300 series

- 1 -

Enterprise 5-Port

10/100/1000T VPN Security

Router

VR-300 Series

Summary of content (136 pages)

PAGE 1
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 Series -1-
PAGE 2
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Copyright Copyright (C) 2021 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed products of PLANET Technology, This User’s Manual contains proprietary information protected by copyright, and this User’s Manual and all accompanying hardware, software, and documentation are copyrighted.
PAGE 3
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.
PAGE 4
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Table of Contents Chapter 1. Product Introduction............................................................................................. 7 1.1 Package Contents ...................................................................................................... 8 1.2 Overview .................................................................................................................... 8 1.3 Topology .......................
PAGE 5
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.6 4.7 4.8 4.9 4.5.5 Routing................................................................................................... 82 4.5.6 WAN IPv6 Setting .................................................................................. 84 4.5.7 DHCP ..................................................................................................... 84 4.5.8 DDNS ...................................................................
PAGE 6
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.10.3 MAC ACL ............................................................................................. 127 4.10.4 WiFi Advanced ..................................................................................... 128 4.10.5 WiFi Statistics ...................................................................................... 129 4.10.6 Connection Status .............................................................................
PAGE 7
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Chapter 1. Product Introduction Thank you for purchasing PLANET VPN Router, VR-300 Series. The descriptions of these models are as follows: VR-300 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300P Enterprise 4-Port 10/100/1000T 802.3at PoE + 1-Port 10/100/1000T VPN Security Router VR-300F Enterprise 4-Port 10/100/1000T + 1-Port 1000X SFP VPN Security Router VR-300FP Enterprise 4-Port 10/100/1000T 802.
PAGE 8
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 1.1 Package Contents The package should contain the following:  VPN Router x 1  Quick Installation Guide x 1  Power Cord x 1  Rubber Feet x 4  Rack-mounting Kit x 1  2.
PAGE 9
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series extremely high-speed user experience, the VR-300W5 adopts IEEE 802.11ac technology to increase the speed from the 802.11n standard 40MHz to 80MHz and to implement the 256-QAM modulation where higher transmitting/receiving rates go up to 867Mbps in 5GHz less interference frequency band.
PAGE 10
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Centralized Remote Control of Managed APs* The VR-300 series provides centralized management of PLANET Smart AP series via a user-friendly Web GUI. It's easy to configure AP for the wireless SSID, radio band and security settings. With a four-step configuration process, different purposes of wireless profiles can be simultaneously delivered to multiple APs or AP groups to minimize deployment time, effort and cost.
PAGE 11
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 1.3 Topology Improving Network Efficiency It is applicable to the small-scale sector (from 60 to 100 people), using a 13-inch desktop design, with five Gigabit ports (WAN/LAN). It provides higher performance with all Gigabit Ethernet interfaces which offer faster speeds for your network applications.
PAGE 12
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series - 12 -
PAGE 13
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 1.4 Features  Highlights  Dual-WAN failover and Dual-WAN load balancing  SSL VPN and robust hybrid VPN (IPSec/PPTP/L2TP over IPSec)  Stateful Packet Inspection (SPI) firewall and content filtering  Blocks DoS/DDOS attack, port range forwarding  High Availability, AP Controller, Captive Portal and RADIUS  Compliant with the IEEE 802.
PAGE 14
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series  Provides multiple adjustable transmit power control  High-speed wireless data rate of up to 18Gbps (600Mbps for 2.4GHz and 1200Mbps for 5GHz)  Power over Ethernet (PoE model only)  Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE  Backward compatible with IEEE 802.3af Power over Ethernet  Up to 4 ports of IEEE 802.3af / 802.
PAGE 15
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series  Networking  Outbound load balancing  Failover for dual-WAN  Static IP/DHCP client for WAN  Protocols: TCP/IP, UDP, ARP, IPv4, IPv6  Port forwarding  DMZ  SNMP  DHCP server/NTP client  MAC address clone  DDNS: PLANET DDNS, PLANET Easy DDNS, DynDNS and No-IP  Cybersecurity  Others  Setup wizard  Dashboard for real-time system overview  Supported access by HTTP or HTTPS  Auto reboot  PLANET S
PAGE 16
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 1.5 Product Specifications VR-300 Product Hardware Specifications Ethernet USB Port Reset Button Thermal Fan LED Indicators Installation Power Requirements Power Consumption Weight Dimensions (W x D x H) Enclosure Security Service Enterprise 5-Port 10/100/1000T VPN Security Router 5 10/100/1000BASE-T RJ45 Ethernet ports including 3 LAN ports (Port-1 to Port-3) 1 LAN/WAN port (Port-4) 1 WAN port (Port-5) 1 USB 3.
PAGE 17
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series L2TP Server, SSL Server/Client (Open VPN) VPN Tunnels VPN Throughput Encryption Methods Authentication Methods Management Basic Management Interfaces Secure Management Interfaces System Log Others Standards Conformance Regulatory Compliance Environment Specifications Operating Storage Max. 60 Max.
PAGE 18
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Power Pin Assignment PoE Power Budget Max. Number of Class 4 PDs PoE Management 1/2 (+), 3/6 (-) 120 watts (max.) @ 25 degrees C 100 watts (max.
PAGE 19
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Auto reboot Diagnostics Standards Conformance Regulatory Compliance Environment Specifications Operating Storage CE, FCC Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 95% (non-condensing) Temperature: -10 ~ 60 degrees C Relative Humidity: 5 ~ 95% (non-condensing) - 19 -
PAGE 20
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series VR-300F Product Enterprise 4-Port 10/100/1000T + 1-Port 1000X SFP VPN Security Router Hardware Specifications Ethernet USB Port Reset Button Thermal Fan LED Indicators Installation Power Requirements Power Consumption Weight Dimensions (W x D x H) Enclosure Security Service 4 10/100/1000BASE-T RJ45 Ethernet ports including 1 1000BASE-X mini-GBIC/SFP slot 3 LAN ports (Port-1 to Port-3) 1 LAN/WAN port (Port-4) 1 WAN port (Port-5) 1 USB 3.
PAGE 21
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series VPN Tunnels VPN Throughput Encryption Methods Authentication Methods Management Basic Management Interfaces Secure Management Interfaces System Log Others Standards Conformance Regulatory Compliance Environment Specifications Operating Storage Max. 60 Max.
PAGE 22
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Power Pin Assignment PoE Power Budget Max. Number of Class 4 PDs PoE Management 1/2 (+), 3/6 (-) 120 watts (max.) @ 25 degrees C 100 watts (max.
PAGE 23
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Auto reboot Diagnostics Standards Conformance Regulatory Compliance Environment Specifications Operating Storage CE, FCC Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 95% (non-condensing) Temperature: -10 ~ 60 degrees C Relative Humidity: 5 ~ 95% (non-condensing) - 23 -
PAGE 24
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series VR-300W5 Product Hardware Specifications Ethernet USB Port Reset Button Thermal Fan LED Indicators Installation Power Requirements Power Consumption Weight Dimensions (W x D x H) Enclosure Wireless Standard Band Mode Wi-Fi 5 AC1200 Dual Band VPN Security Router 5 10/100/1000BASE-T RJ45 Ethernet ports including 3 LAN ports (Port-1 to Port-3) 1 LAN/WAN port (Port-4) 1 WAN port (Port-5) 1 USB 3.
PAGE 25
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series The actual distance may vary in different environments. Transmission Power Encryption Security Wireless Advanced <=20dBm (2.4G frequency band: 2.400 – 2.4835 GHz) <=23dBm (5G frequency band: 5.150 – 5.350 GHz) WEP (64/128-bit) encryption security WPA / WPA2 (TKIP/AES) WPA-PSK / WPA2-PSK (TKIP/AES) 802.
PAGE 26
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Statistics Connections status Auto reboot Diagnostics Standards Conformance Regulatory Compliance Environment Specifications Operating Storage CE, FCC Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 95% (non-condensing) Temperature: -10 ~ 60 degrees C Relative Humidity: 5 ~ 95% (non-condensing) VR-300PW5 Product Wi-Fi 5 AC1200 Dual Band VPN Security Router with 4-Port 802.
PAGE 27
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series PoE Management PD alive check Scheduled power recycling PoE schedule PoE usage monitoring Wireless Standard IEEE 802.11 b/g/n 2.4 GHz IEEE 802.11 a/n/ac 5 GHz Band Mode 2.4G / 5G concurrent mode 2.4GHz America FCC: 2.412~2.462GHz Europe ETSI: 2.412~2.484GHz 5GHz America FCC: 5.180~5.240GHz, 5.725~5.850GHz Europe ETSI: 5.180~5.240GHz 2.
PAGE 28
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Content Filtering Bandwidth Management MAC filtering IP filtering Web filtering Outbound load balancing Failover for dual-WAN QoS (Quality of Service) Networking Operation Mode Routing mode Routing Protocol Static Route, Dynamic Route (RIP), OSPF VLAN 802.1q Tag-based, Port-based, Multi-VLAN Multicast IGMP Proxy NAT Throughput Max.
PAGE 29
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series - 29 -
PAGE 30
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series VR-300W6A Product Model Hardware Specifications Ethernet USB Port Reset Button Fanless Installation Power Requirements Power Consumption Weight Dimensions (W x D x H) Enclosure LED Indicators Wi-Fi 6 AX2400 2.4GHz/5GHz VPN Security Router VR-300W6A 5 10/100/1000BASE-T RJ45 Ethernet ports including 3 LAN ports (Port-1 to Port-3) 1 LAN/WAN port (Port-4) 1 WAN port (Port-5) 1 USB 3.
PAGE 31
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Encryption Security Wireless Advanced 17dBm@MCS7,HT40 11a: 19.5dBm +/- 1.5dbm @54Mbps 11a/n: 19.5dBm+/- 1.5dbm @MCS7, HT20 17dBm@MCS7, HT40 11ac HT20: 20+/-1.5dBm @MCS8 11ac HT40: 17+/-1.5dBm @MCS9 11ac HT80: 14.5+/-1.5dBm @MCS9 11ax HT20: 20+/-1.5dBm @MCS9 11ax HT40: 17 +/- 1.5dBm @MCS9 11ax HT80: 14.5 +/- 1.5dBm @MCS11 WEP (64/128-bit) encryption security WPA / WPA2 (TKIP/AES) WPA-PSK / WPA2-PSK (TKIP/AES) / WPA3-PSK (TKIP/AES) 802.
PAGE 32
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Secure Management Interfaces System Log Others Standards Conformance Regulatory Compliance Environment Specifications Operating Storage Planet CloudViewer APP SSHv2, TLSv1.
PAGE 33
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Wireless Standard Band Mode Frequency Range IEEE 802.11a/n/ac/ax 5GHz IEEE 802.11g/b/n/ax 2.4GHz 2.4G / 5G selectable mode America FCC: 2.412~2.462GHz 2.4GHz Europe ETSI: 2.412GHz~2.472GHz America FCC: 5.180~5.240GHz, 5.745~5.825GHz 5GHz Europe ETSI: 5.180~5.700GHz America FCC: 1~11 2.
PAGE 34
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Content Filtering Bandwidth Management Networking Operation Mode Routing Protocol VLAN Multicast NAT Throughput Outbound Load Balancing Protocol Key Features UPnP MAC filtering IP filtering Web filtering Outbound load balancing Failover for dual-WAN QoS (Quality of Service) Routing mode Static Route, Dynamic Route (RIP), OSPF 802.1q Tag-based, Port-based, Multi-VLAN IGMP Proxy Max.
PAGE 35
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series VR-300W6 Product Hardware Specifications Ethernet USB Port Reset Button Thermal Fan LED Indicators Installation Power Requirements Power Consumption Weight Dimensions (W x D x H) Enclosure Wireless Standard Band Mode Frequency Range Wi-Fi 6 AC1800 Dual Band VPN Security Router 5 10/100/1000BASE-T RJ45 Ethernet ports including 3 LAN ports (Port-1 to Port-3) 1 LAN/WAN port (Port-4) 1 WAN port (Port-5) 1 USB 3.
PAGE 36
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Encryption Security Wireless Advanced 11g: 20dbm+/- 1.5dbm @54Mbps 11g/n: 20dBm +/- 1.5dbm @MCS7, HT20 17dBm@MCS7,HT40 11a: 19.5dBm +/- 1.5dbm @54Mbps 11a/n: 19.5dBm+/- 1.5dbm @MCS7, HT20 17dBm@MCS7, HT40 11ac HT20: 20+/-1.5dBm @MCS8 11ac HT40: 17+/-1.5dBm @MCS9 11ac HT80: 14.5+/-1.5dBm @MCS9 11ax HT20: 20+/-1.5dBm @MCS9 11ax HT40: 17 +/- 1.5dBm @MCS9 11ax HT80: 14.5 +/- 1.
PAGE 37
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Secure Management Interfaces System Log Others Standards Conformance Regulatory Compliance Environment Specifications Operating Storage SNMP v1, v2c PLANET Smart Discovery utility/UNI-NMS supported Planet CloudViewer APP SSHv2, TLSv1.
PAGE 38
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series PoE schedule PoE usage monitoring Wireless Standard Band Mode Frequency Range Operating Channels Channel Width IEEE 802.11a/n/ac/ax 5GHz IEEE 802.11g/b/n/ax 2.4GHz 2.4G / 5G concurrent mode 2.4GHz 2.4GHz 5GHz 5GHz 2.4GHz 2.4GHz 5GHz 5GHz 20MHz, 40MHz, 80MHz Transmit: 600 Mbps* for 2.4 GHz and 1200 Mbps* for 5 GHz Receive: 600 Mbps* for 2.
PAGE 39
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series NAT Throughput Outbound Load Balancing Protocol Key Features Max.
PAGE 40
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Chapter 2. Hardware Introduction 2.1 Physical Descriptions Front View VR-300 VR-300F VR-300W5 VR-300W6A VR-300W6  LAN Per 10/100/1000Mbps PoE port (Port-1 to Port-4) LED Color Function To indicate the port is running at 1000Mbps or 100Mbps or 10Mbps and successfully established To indicate that the router is actively sending or receiving data over Blink: that port. Lights.
PAGE 41
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series  WAN Per 10/100/1000Mbps RJ45 port (Port and Port-5) LED Color Function Green To indicate the port is running at 1000Mbps or 100Mbps or 10Mbps and successfully established To indicate that the router is actively sending or receiving data over Blink: that port. Lights. LNK/ACT LED Color Function PWR Green Lights up when the power is on. Internet Green Lights up when the router connects to internet successfully. 2.
PAGE 42
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series  LAN Per 10/100/1000Mbps PoE port (Port-1 to Port-4) LED Color Function To indicate the port is running at 1000Mbps or 100Mbps or 10Mbps and successfully established To indicate that the router is actively sending or receiving data over that Blink: port. Lights.
PAGE 43
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series VR-300W6 VR-300P VR-300PW5 and VR-300PW6A VR-300PW6 Interface For compatibility with electrical outlet standard in most areas of the world, the device’s power supply automatically adjusts to line power in the range of AC Power Receptacle 100-240V AC and 50/60Hz. Plug the female end of the power cord firmly into the receptacle on the rear panel of the device and the other end into an electrical outlet, and the power will be ready.
PAGE 44
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 2.2 Hardware Installation To install the VR-300 Series on desktop, simply follow the following steps: Step 1: For wireless models, fasten the 2.4G/5G antennas to the 2.4G/5G antenna connectors. And you can bend the antennas to fit your actual needs. Step 2: Place the VPN Router on desktop. Step 3: Keep enough ventilation space between the VPN Router and the surrounding objects.
PAGE 45
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Chapter 3. Preparation Before getting into the device’s web UI, user has to check the network setting and configure PC’s IP address. 3.1 Requirements User is able to confirm the following items before configuration: 1. Please confirm the network is working properly; it is strongly suggested to test your network connection by connecting your computer directly to ISP. 2. Suggested operating systems: Windows 7 / 8 / 10. 3.
PAGE 46
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 3.2 Setting TCP/IP on your PC The default IP address of the VPN router is 192.168.1.1, and the DHCP Server is on. Please set the IP address of the connected PC as DHCP client, and the PC will get IP address automatically from the VPN router. Please refer to the following to set the IP address of the connected PC. Windows 7/8 If you are using Windows 7/8, please refer to the following: 1.
PAGE 47
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 2. Click "Change adapter settings". 3. Right-click on the Local Area Connection and select Properties.
PAGE 48
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties or directly double-click on Internet Protocol Version 4 (TCP/IPv4).
PAGE 49
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 5. Select "Use the following IP address" and "Obtain DNS server address automatically", and then click the “OK” button.
PAGE 50
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Windows 10 If you are using Windows 10, please refer to the following: 1. In the search box on the taskbar, type “View network connections”, and then select View network connections at the top of the list.
PAGE 51
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 2. Right-click on the Local Area Connection and select Properties. 3. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties or directly double-click on Internet Protocol Version 4 (TCP/IPv4).
PAGE 52
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4. Select "Use the following IP address" and "Obtain DNS server address automatically", and then click the “OK” button.
PAGE 53
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 3.3 Planet Smart Discovery Utility For easily listing the router in your Ethernet environment, the search tool -- Planet Smart Discovery Utility -- is an ideal solution. The following installation instructions are to guide you to running the Planet Smart Discovery Utility. 1. Download the Planet Smart Discovery Utility in administrator PC. 2. Run this utility as the following screen appears.
PAGE 54
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Figure 3-1-7: Planet Smart Discovery Utility Screen 1. This utility shows all necessary information from the devices, such as MAC address, device name, firmware version, and device IP subnet address. It can also assign new password, IP subnet address and description to the devices. 2. After setup is completed, press the “Update Device”, “Update Multi” or “Update All” button to take effect.
PAGE 55
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Chapter 4. Web-based Management This chapter provides setup details of the device’s Web-based Interface. 4.1 Introduction The device can be configured with your Web browser. Before configuring, please make sure your PC is under the same IP segment with the device. 4.2 Logging in to the VPN Router Refer to the steps below to configure the VPN router: Step 1.
PAGE 56
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.3 Main Web Page After a successful login, the main web page appears. The web main page displays the web panel, main menu, function menu, and the main information in the center. Main Menu Web Panel Function Menu Figure 4-: Main Web Page ■ Web Panel The web panel displays an image of the device’s ports as shown in Figure 4-2. Figure 4-2: Web Panel Object PoE Cosumption Icon Function To indicate the PoE consumption.
PAGE 57
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series The main menu displays the product name, function menu, and main information in the center. Via the Web management, the administrator can set up the device by selecting the functions those listed in the function menu and button as shown in Figures 4-3 and 4-4. Figure 4-3: Function Menu Object Description System Provides System information of the router. Network Provides WAN, LAN and network configuration of the router.
PAGE 58
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.4 System Use the System menu items to display and configure basic administrative details of the router. The System menu shown in Figure 4-5 provides the following features to configure and monitor system. Figure 4-5: System Menu Object Wizard Description The Wizard will guide the user to configuring the router easily and quickly. Dashboard The overview of system information includes connection, port, and system status.
PAGE 59
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Connection Status Display the DHCP client table and the ARP table SFP Module Information Display the physical or operational status of an SFP module via the SFP Module Information page (VR-300F and VR-300FP only) High Availability Enable/Disable High Availability on routers RADIUS Enable/Disable RADIUS on routers Captive Portal Enable/Disable Captive Portal on routers SNMP Display SNMP system information NMS Enable/Disable NMS on
PAGE 60
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.4.1 Setup Wizard The Wizard will guide the user to configuring the router easily and quickly. There are different procedures in different operation modes. According to the operation mode you switch to, please follow the instructions below to configure the router via Setup Wizard as shown in Figure 4-6.
PAGE 61
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Figure 4-7: Setup Wizard – LAN Configuration Object Description IP Address Enter the IP address of your router. The default is 192.168.1.1. Subnet Mask An address code that determines the size of the network. Normally use 255.255.255.0 as the subnet mask. DHCP Server Start IP Address By default, the DHCP Server is enabled. If user needs to disable the function, please uncheck the box. By default, the start IP address is 192.168.1.100.
PAGE 62
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Figure 4-9: Setup Wizard – WAN 2 Configurations Mode 1 -- Static IP Select Static IP Address if all the Internet port’s IP information is provided to you by your ISP. You will need to enter the IP Address, Netmask, Default Gateway and DNS Server provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x).
PAGE 63
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Next Press this button for the next step. Previous Press this button for the previous step. Press this button to undo any changes made locally and revert Cancel to previously saved values. Mode 2 -- DHCP Client Select DHCP Client to obtain IP Address information automatically from your ISP. The setup is shown in Figure 4-11.
PAGE 64
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series The SPI Firewall prevents attack and improper access to network SPI Firewall resources. The default configuration is enabled. SYN Flood is a popular attack way. DoS and DDoS are TCP Block SYN Flood protocols. Hackers like using this method to make a fake connection that involves the CPU, memory, and so on. The default configuration is enabled.
PAGE 65
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Figure 4-13: Setup Wizard – Setup Completed Object Description Finish Press this button to save and apply changes. Previous Press this button for the previous step.
PAGE 66
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.4.2 Dashboard The dashboard provides an overview of system information including connection, port, and system status as shown in Figure 4-14. Figure 4-14: Dashboard WAN/LAN Connection Status Object Description The status means WAN is connected to Internet and LAN is connected. The status means WAN is disconnected to Internet and LAN is connected. The status means WAN is connected to Internet and LAN is disconnected.
PAGE 67
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series USB port is not in use. Wireless Status Object Description Wireless is in use. Wireless is not in use. System Information Object Description CPU Display the CPU loading Memory Display the memory usage PoE Budget Display the PoE Budget usage (PoE model only) 4.4.3 Status This page displays system information as shown in Figure 4-15.
PAGE 68
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Figure 4-15: Status 4.4.4 Statistics This page displays the number of packets that pass through the router on the WAN and LAN. The statistics are shown in Figure 4-16.
PAGE 69
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.4.5 Connection Status The page will show the DHCP Table and ARP Table. The status is shown in Figure 4-17. Figure 4-17: Connection Status 4.4.6 SFP Module Information This page shows the operational status, such as the transceiver type, speed, wavelength, optical output power, optical input power, temperature, laser bias current and transceiver supply voltage in real time. The SFP Module Information page is shown in Figure 4-18.
PAGE 70
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series fails. • Distance (m) Display the support distance of current SFP module; the distance value is obtained from the SFP module. • Temperature (C) Display the temperature of current SFP DDM module; the – SFP DDM Module temperature value is gotten from the SFP DDM module. Only • Voltage (V) Display the voltage of current SFP DDM module; the voltage value is – SFP DDM Module gotten from the SFP DDM module.
PAGE 71
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.4.7 High Availability High Availability (HA) is a system redundancy where two routers of VR-300 series can be set up in a master/slave configuration. The master router provides the Internet connection but, in case hardware or WAN connectivity fails, the slave (backup) router automatically will take over Internet connection. It provides redundant hardware and software that make the system available despite failures.
PAGE 72
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.4.8 RADIUS Remote Authentication Dial-In User Service (RADIUS) is a security authentication client/server protocol that supports authentication, authorization and accounting. The RADIUS Server page is shown in Figure 4-20. Figure 4-20: RADIUS Server Object Description Disable or enable the RADIUS function. RADIUS The default configuration is disabled.
PAGE 73
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.4.9 Captive Portal Captive portal service gives the ability to organize a public (or guest) Wi-Fi zone with user authorization. A captive portal is the authorization page that forcibly redirects users who connect to the public network before accessing the Internet. The Captive portal page is shown in Figure 4-22. Figure 4-22: Captive portal Object Captive portal Description Disable or enable the Captive portal function.
PAGE 74
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.4.10 SNMP This page provides SNMP setting of the router as shown in Figure 4-23. Figure 4-23: SNMP Object Enable SNMP Description Disable or enable the SNMP function. The default configuration is enabled. Read/Write Community Allows entering characters for SNMP Read/Write Community of the router. System Name Allows entering characters for system name of the router.
PAGE 75
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.4.11 NMS The VR-300 series can support both NMS controller and CloudViewer Server for remote management. PLANET's NMS Controller is a Network Management System that can monitor all kinds of deployed network devices, such as managed switches, media converters, routers, smart APs, VoIP phones, IP cameras, etc., compliant with the SNMP Protocol, ONVIF Protocol and PLANET Smart Discovery utility.
PAGE 76
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series The CloudViewer Server – Internet screens in Figure 4-26 appear.
PAGE 77
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.5 Network The Network function provides WAN, LAN and network configuration of the router as shown in Figure 4-27. Figure 4-27: Network Menu Object Description WAN Allows setting WAN interface. WAN Advanced Allows setting WAN Advanced settings. LAN Allows setting LAN interface. Multi-Subnet Allows setting Multi-Subnet1 ~ Subnet4 interface. VLAN UPnP Disable or enable the VLAN function. The default configuration is disabled.
PAGE 78
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series The default configuration is disabled. OSPF IGMP Disable or enable the OSPF function. The default configuration is disabled. Disable or enable the IGMP function. The default configuration is disabled. IPv6 Allows setting IPv6 WAN interface. DHCP Allows setting DHCP Server. DDNS Allows setting DDNS and PLANET DDNS. MAC Address Clone Allows setting WAN MAC Address Clone.
PAGE 79
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.5.1 WAN This page is used to configure the parameters for Internet network which connects to the WAN port of the router as shown in Figure 4-28. Here you may select the access method by clicking the item value of WAN access type. Figure 4-28: WAN Object Description Please select the corresponding WAN Access Type for the Internet, and fill out the correct parameters from your local ISP in the fields which appear below.
PAGE 80
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object Description Netmask Enter the Subnet Mask assigned by your ISP. Gateway Enter the Gateway assigned by your ISP. DNS Server The DNS server information will be supplied by your ISP. DHCP Select DHCP Client to obtain IP Address information automatically from your ISP. WAN IP, whether obtained automatically or specified manually, should NOT be on the same IP net segment as the LAN IP; otherwise, the router will not work properly.
PAGE 81
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object Load Balance Weight External Connection Detection Detect Interval Description Load Balance Weight allows you to set a relative weight (from 1 - 10) for each WAN port. Enable to detect the status of WAN connection. Set the detect interval as you need. The recommended value is 5 (default). Detect Link Up Set the times for detecting link up. Threshold The recommended value is 8 (default).
PAGE 82
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.5.4 Multi-Subnet 4.5.5 Routing Please refer to the following sections for the details as shown in Figures 4-31 and 32.
PAGE 83
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Figure 4-32: Routing setup Routing tables contain a list of IP addresses. Each IP address identifies a remote router (or other network gateway) that the local router is configured to recognize. For each IP address, the routing table additionally stores a network mask and other data that specifies the destination IP address ranges that remote device will accept. Object Description There are two types: Host and Net.
PAGE 84
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.5.6 WAN IPv6 Setting This page is used to configure parameter for IPv6 internet network which connects to WAN port of the router as shown in Figure 4-33. It allows you to enable IPv6 function and set up the parameters of the router’s WAN. In this setting you may change WAN connection type and other settings. Figure 4-33: IPv6 WAN setup Object Description Connection Type Select IPv6 WAN type either by using DHCP or Static.
PAGE 85
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Figure 4-34: DHCP Object Description By default, the DHCP Server is enabled, meaning the router will DHCP Service assign IP addresses to the DHCP clients automatically. If user needs to disable the function, please set it as disable. Start IP Address By default, the start IP address is 192.168.1.100. Please do not set it to the same IP address of the router.
PAGE 86
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.5.8 DDNS The router offers the DDNS (Dynamic Domain Name System) feature, which allows the hosting of a website, FTP server, or e-mail server with a fixed domain name (named by yourself) and a dynamic IP address, and then your friends can connect to your server by entering your domain name no matter what your IP address is. Before using this feature, you need to sign up for DDNS service providers such as PLANET DDNS (http://www.planetddns.
PAGE 87
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Figure 4-35: PLANET DDNS Object DDNS Service Interface Description By default, the DDNS service is disabled. If user needs to enable the function, please set it as enable. User is able to select the interface for DDNS service. By default, the interface is WAN 1. There are three options: DDNS Type 1. PLANET DDNS: Activate PLANET DDNS service. 2. DynDNS: Activate DynDNS service. 3. NOIP: Activate NOIP service.
PAGE 88
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.5.9 MAC Address Clone Clone or change the MAC address of the WAN interface. The setup is shown in Figure 4-36. Figure 4-36: MAC Address Clone Object Description Clone WAN MAC Set the function as enable or disable. MAC Address Input a MAC Address, such as A8:F7:E0:00:06:62.
PAGE 89
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.6 Security The Security menu provides Firewall, Access Filtering and other functions as shown in Figure 4-37. Please refer to the following sections for the details. Figure 4-37: Security menu Object Description Firewall Allows setting DoS (Denial of Service) protection as enable. MAC Filtering Allows setting MAC Filtering. IP Filtering Allows setting IP Filtering. Web Filtering Allows setting Web Filtering.
PAGE 90
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.6.1 Firewall A "Denial-of-Service" (DoS) attack is characterized by an explicit attempt by hackers to prevent legitimate users of a service from using that service. The router can prevent specific DoS attacks as shown in Figure 4-38. Figure 4-38: Firewall Object Description The SPI Firewall prevents attack and improper access to network SPI Firewall resources. The default configuration is enabled. SYN Flood is a popular attack way.
PAGE 91
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series If the function is enabled, when the number of the current Block UDP Flood UPD-FLOOD packets is beyond the set value, the router will start the blocking function immediately. The default configuration is disabled. ICMP is kind of a pack of TCP/IP; its important function is to transfer Block ICMP Flood simple signal on the Internet. There are two normal attack ways which hackers like to use, Ping of Death and Smurf attack.
PAGE 92
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.6.2 MAC Filtering Entries in this table are used to restrict certain types of data packets from your local network or Internet through the router. Use of such filters can be helpful in securing or restricting your local network as shown in Figure 4-39. Figure 4-39: MAC Filtering Object Description Set the function as enable or disable.
PAGE 93
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.6.3 IP Filtering IP Filtering is used to deny LAN users from accessing the public IP address on internet as shown in Figure 4-40. To begin blocking access to an IP address, enable IP Filtering and enter the IP address of the web site you wish to block. Figure 4-40: IP Filtering Object Description IP Filtering Set the function as enable or disable. Add IP Filtering Rule Go to the Add Filtering Rule page to add a new rule.
PAGE 94
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object Description Destination IP Address Input the IP address of web site which you want to block. Anywhere (of destination Check the box if you want to control all web sites, meaning the LAN IP Address) user can’t visit any web site. Destination Port Input the port of destination IP Address which you want to block. Leave it as blank if you want to block all ports of the web site. Select the protocol type (TCP, UDP or all).
PAGE 95
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object Description Set the rule as enable or disable. Status Input the URL address that you want to filter, such as Filter Keyword www.yahoo.com. 4.6.5 Port Forwarding Entries in this table allow you to automatically redirect common network services to a specific machine behind the NAT firewall as shown in Figure 4-44.
PAGE 96
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object Rule Name Description Enter any words for recognition. Select the protocol type (TCP, UDP or both). If you are unsure, Protocol please leave it to the default both protocols. Enter the external ports you want to control. For TCP and UDP External Service Port services, enter the beginning of the range of port numbers used by the service. If the service uses a single port number, enter it in both the start and finish fields.
PAGE 97
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object Description Enter the IP address of a particular host in your LAN which will DMZ IP Address receive all the packets originally going to the WAN port/Public IP address above. 4.7 Virtual Private Network To obtain a private and secure network link, the router is capable of establishing VPN connections.
PAGE 98
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series L2TP Allows setting L2TP function. SSL VPN Allows setting SSL VPN function. Certificates Download System CA Certificate VPN Connection Allows checking VPN Connection Status. 4.7.1 IPSec IPSec (IP Security) is a generic standardized VPN solution. IPSec must be implemented in the IP stack which is part of the kernel. Since IPSec is a standardized protocol it is compatible to most vendors that implement IPSec.
PAGE 99
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Figure 4-49: IPSec Tunnel Object Description IPSec Tunnel Enable Check the box to enable the function. Tunnel Name Enter any words for recognition. This is only available for host-to-host connections and specifies to Interface which interface the host is connecting. 1. WAN 1. 2. WAN 2. Local Network The local subnet in CIDR notation. For instance, "192.168.1.0”. Local Netmask The netmask of this router.
PAGE 100
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Remote IP Address Input the IP address of the remote host. For instance, "210.66.1.10”. Remote Network The remote subnet in CIDR notation. For instance, "210.66.1.0”. Remote Netmask The netmask of the remote host. Set up the detection time of DPD (Dead Peer Detection). By default, the DPD detection’s gap is 30 seconds, over 150 seconds to think that is the broken line.
PAGE 101
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series by using it three times. It can achieve an algorithm up to 168 bits. 3. SHA1: The SHA1 is a revision of SHA. It has improved the shortcomings of SHA. By producing summary hash values, it can achieve an algorithm up to 160 bits. 4. SHA2: Either 256, 384 or 512 can be chosen. 5. MD5 Algorithm: MD5 processes a variably long message into a fixed-length output of 128 bits. You can specify how long ESP packets are valid.
PAGE 102
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Figure 4-51: GRE Tunnel Object Description Active Check the box to enable the function. Tunnel Name Enter any words for recognition. This is only available for host-to-host connections and specifies to which interface the host is connecting. Through 1. LAN. 2. WAN 1. 3. WAN 2. Peer WAN IP Address Input the IP address of the remote host. For instance, "210.66.1.10”. Peer Netmask The remote subnet in CIDR notation.
PAGE 103
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.7.3 PPTP Server Use the IP address and the scope option needs to match the far end of the PPTP server; its goal is to use the PPTP channel technology, and establish Site-to-Site VPN where the channel can have equally good results from different methods with IPSec. The PPTP server is shown in Figure 4-52. Figure 4-52: PPTP server Object Description PPTP Server Set the function as enable or disable.
PAGE 104
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series MSCHAP v2 DNS WINS Server IP Address Set the authentication as enable or disable. When the PPTP client connects to the PPTP server, it will assign the DNS server IP address to client. When the PPTP client connects to the PPTP server, it will assign the WINS server IP address to client. Input the IP address of the PPTP Server. For instance, "192.168.10.1”.
PAGE 105
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.7.4 L2TP Server This section assists you in setting the L2TP Server as shown in Figure 4-53. Figure 4-53: L2TP Server Object Description L2TP Server Set the function as enable or disable. Server IP Address Input the IP address of the L2TP Server. For instance, "192.168.50.1”. When the VPN connection is established, the VPN client will get IP Clients IP Address address from the VPN Server. Please set the range of IP Address.
PAGE 106
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object Description With IPsec Set the function as enable to make the L2TP work with IPsec encryption. Preshare Key Enter a pass phrase. User and Password Create the username and password for the VPN client. Connection Type 1. Main. 2. Aggressive. It provides the way to create the SA between two PCs.
PAGE 107
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.7.5 SSL VPN This section assists you in setting the SSL Server as shown in Figure 4-54. Figure 4-54: SSL Server Object Description SSL VPN Server Set the function as enable or disable. Port Set a port for the SSL Service. Default port is 1194. Tunnel Protocol Set the protocol as TCP or UDP. Virtual Network Device Set the Virtual Network Device as TUN or TAP. Interface User is able to select the interface for SSL service using.
PAGE 108
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.7.6 VPN Connection This page shows the VPN connection status as shown in Figure 4-55. Figure 4-55: VPN Connection Status Object Description VPN Connection Click the IPSec/GRE/…/SSL VPN bookmark to check the current Status connection status.
PAGE 109
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.8 AP Control The AP Control menu provides the following features for managing the system as Figure 4-56 is shown below: Figure 4-56: AP Control Menu Object Preference Description Edit region, RO community, RW community AP Search Search APs in the same domain AP Management Config APs IP Address, Subnet Mask, SSID and Radio Profiles AP Group Management Grouping same model AP SSID Profile Setup SSID Profile Radio 2.
PAGE 110
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.8.1 Preference On this page, you can choose the device region of FCC or ETSI. Then edit RO community and RW community for public or private use. Select Apply or Reset. Noted: Device of FCC and device of ETIS cannot be shown at the same time. 4.8.2 AP Search On this page, you can add new APs in your AP Control System. Step as follows : Step 1. Press the Search button to discover PLANET devices. Step 2.
PAGE 111
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.8.3 AP Management On this page, you can management your APs, Including check AP online status, config AP (IP address, Mask, SSID and Radio profile), reboot AP, firmware update, delete AP in the AP Control system. Status Object Description Connection status: online, offline, Wi-Fi disabled In progress: action in progress Finished/Successful: action finished and successful. Failed: action failed.
PAGE 112
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Notes: 1. To configure multiple APs at one time, select multiple APs and then choose one of the action icons on the top of the page. The "Link" action is not allowed for multiple APs. 2. When finish setup AP, you need to press Apply button to complete setup. 4.8.4 AP Group Management On the AP Group Management page, you can create AP group and control one or more AP groups.
PAGE 113
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Note: To do profile provisioning to multiple AP groups at one time, select multiple AP groups, and then click the “Apply” button. The "Link" action is not allowed for multiple APs or AP group. 4.8.5 SSID Profile On the SSID profile configuration page, enter the value that you preferred and then click “Apply” to save the profile Action: Object Description Add new profile: Click it to add a new profile.
PAGE 114
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.8.6 Radio 2.4G Profile On the Radio profile configuration page, enter the value that you preferred and then click “Apply” to save the profile. Action: Object Description Add new profile: Click it to add a new profile. Delete selected item: Click it to delete the selected profile. Edit: Click it to edit the profile. Delete: Click it to delete the single profile. Notes: 1.
PAGE 115
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.8.7 Radio 5G Profile On the Radio profile configuration page, enter the value that you preferred and then click “Apply” to save the profile. Action: Object Description Add new profile: Click it to add a new profile. Delete selected item: Click it to delete the selected profile. Edit: Click it to edit the profile. Delete: Click it to delete the single profile. Notes: 1.
PAGE 116
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.8.8 Statistics AP Status On this page, you can observe the current configuration of all managed APs. Filter: You can filter the AP list by entering the keyword in the field next to the magnifier icon. The keyword should be in any context that belongs to the fields of this page. 4.8.
PAGE 117
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.8.10 Map It On this page you can add managed APs to the actual position against the floor map. This is convenient to user to view and adjust the actual deployment by reference to its real transmission power and channel allocation. 1. Click “Scale” to start to reset the map scale. 2. Press the set button to draw a line on the map. Fill its physical distance in the blank and press Set or Cancel.
PAGE 118
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.8.11 Upload Map On this page, the system allows you to upload your floor map to the system. Note: The system allows user to upload up to 10 floor maps.
PAGE 119
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.9 Power over Ethernet The PoE menu provides the following features for managing the system. Object Description PoE Configuration Allows to centralize management PoE power for PDs. PoE Status Displays the current PoE usage. PoE Schedule Allows centralizing management PoE power for providing schedule. PD Alive Check Allows centralizing management PoE power for checking PDs alive. 4.9.
PAGE 120
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object Description • System PoE Admin Allows user to enable or disable PoE function. It will cause all of PoE Mode • PoE Function ports to supply or not to supply power. There are three modes for PoE mode.  Enable: enable PoE function..  Disable: disable PoE function.  Schedule: enable PoE function in schedule mode. • Schedule Indicates the scheduled profile mode.
PAGE 121
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.9.2 PoE Status This section provide per port PoE status. 4.9.3 PoE Schedule This page allows the user to define PoE schedule and scheduled power recycling. Please press Add New Rule button to start setting PoE Schedule function.
PAGE 122
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object Description • Profile Set the schedule profile mode. Possible profiles are: Profile1 Profile2 Profile3 Profile4 • Week Day Allows user to set week day for defining PoE function by enabling it on the day. • Start Hour Allows user to set what hour PoE function does by enabling it. • Start Min Allows user to set what minute PoE function does by enabling it.
PAGE 123
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series indicated time. • Reboot Hour Allows user to set what hour PoE reboots. This function is only for PoE reboot schedule. • Reboot Min Allows user to set what minute PoE reboots. This function is only for PoE reboot schedule. 4.9.4 PD Alive Check The VPN Router can be configured to monitor connected PD’s status in real-time via ping action.
PAGE 124
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series response. The PoE Switch Series offers the following 3 actions:  PD Reboot: It means system will reset the PoE port that is connected to the PD.  PD Reboot & Alarm: It means system will reset the PoE port and issue an alarm message via Syslog.  Alarm: It means system will issue an alarm message via Syslog.
PAGE 125
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.10 Wireless The Wireless menu provides the following features for managing the system Object Description 2.4G WiFi Allow to configure 2.4G WiFi. 5G WiFi Allow to configure 5G WiFi. MAC ACL Allow configure MAC ACL. WiFi Advanced Allow to configure advanced setting of WiFi. WiFi Statistics Display the statistics of WiFi traffic. Connection Status Display the connection status. 4.10.1 2.
PAGE 126
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object Description Wireless Status Allows user to enable or disable 2.4G WiFi Wireless Name (SSID) It is the wireless network name. The default 2.4G SSID is “PLANET_2.4G” Hide SSID Allows user to enable or disable SSID Bandwidth Select the operating channel width, “20MHz” or “40MHz” Channel It shows the channel of the CPE. Default 2.4GHz is channel 6. Encryption Select the wireless encryption.
PAGE 127
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.10.3 MAC ACL This page allows the user to define MAC ACL.
PAGE 128
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.10.4 WiFi Advanced This page allows the user to define advanced setting of WiFi. Object 2.4G Mode Description 11AC: Select 802.11B/G or 802.11N/G 11AX: Select 802.11B/G or 802.11N/G or 802.11AX 5G Mode 11AC: Select 802.11A or 802.11AN or 802.11AC 11AX: Select 802.11A or 802.11AN or 802.11AC or 802.11AX 2.4GHz Maximum Associated The maximum users are 64 Clients 5GHz Maximum Associated The maximum users are 64 Clients 2.
PAGE 129
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.10.5 WiFi Statistics This page shows the statistics of WiFi traffic. 4.10.6 Connection Status This page shows the host names and MAC address of all the clients in your network Object Description Name Display the host name of connected clients. MAC Address Display the MAC address of connected clients. Signal Display the connected signal of connected clients. Connected Time Display the connected time of connected clients.
PAGE 130
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.11 Maintenance The Maintenance menu provides the following features for managing the system Object Description Administrator Allows changing the login username and password. Date & Time Allows setting Date & Time function. Save/Restore Export the router’s configuration to local or USB sticker. Configuration Restore the router’s configuration from local or USB sticker.
PAGE 131
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object Description Username Input a new username. Password Input a new password. Confirm Password Input password again. 4.11.2 Date and Time This section assists you in setting the system time of the router. You are able to either select to set the time and date manually or automatically obtain the GMT time from Internet as shown in Figure 4-49. Object Current Time Time Zone Select Description Show the current time.
PAGE 132
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series set its time based on your selection. NTP Client Update NTP Server Once this function is enabled, router will automatically update current time from NTP server. User may use the default NTP sever or input NTP server manually. 4.11.3 Saving/Restoring Configuration This page shows the status of the configuration.
PAGE 133
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object USB Storage Description The status of USB storage. Backup Settings to Press the USB Storage button to save setting file to USB storage. Load Settings from Press the USB Storage button to upload setting file from USB storage. Before removing the USB storage from the router, please press the Unmount button first. 4.11.4 Upgrading Firmware This page provides the firmware upgrade of the route.
PAGE 134
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object Description Reboot Press the button to reboot system. Reset Press the button to restore all settings to factory default settings. I'd like to keep the network profiles. Check the box and then press the button to keep the current network profiles and reset all other configurations to factory defaults. 4.11.6 Diagnostics The page allows you to issue ICMP PING packets to troubleshoot IP connectivity issues.
PAGE 135
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object Description Interface Select an interface of the router. Target Host The destination IP Address or domain. Number of Packets Set the number of packets that will be transmitted; the maximum is 100. Ping The time of ping. Be sure the target IP address is within the same network subnet of the router, or you have to set up the correct gateway IP address.
PAGE 136
Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Appendix A: DDNS Application Configuring PLANET DDNS steps: Step 1: Visit DDNS provider’s web site and register an account if you do not have one yet. For example, register an account at http://planetddns.com Step 2: Enable DDNS option through accessing web page of the device. Step 3: Input all DDNS settings.