User's Manual

Enterprise 5-Port 10/100/1000T VPN Security Router
VR-300 series
- 44 -
2.2 Hardware Installation
To install the VR-300 Series on desktop, simply follow the following steps:
Step 1: For wireless models, fasten the 2.4G/5G antennas to the 2.4G/5G antenna connectors. And
you can bend the antennas to fit your actual needs.
Step 2: Place the VPN Router on desktop.
Step 3: Keep enough ventilation space between the VPN Router and the surrounding objects.
When choosing a location, please keep in mind the environmental restrictions should be
under the specifications of the VPN router.
Step 4: Connect your VPN Router to hub / switch.
A. Connect one end of a standard network cable to the LAN port (port 1) on the front panel of the VPN
router.
B. Connect the other end of the cable to the hub / switch.
The UTP Category 5e/6 network cabling with RJ45 tips is recommended.
Step 5: Connect your VPN Router to internet.
A. Connect one end of a standard network cable to the WAN port (port 5) on the front panel of the
VPN router.
B. Connect the other end of the cable to the ADSL router’s LAN port or an upper layer port to outer
network layer.
If there is only one line connected to the outer network in your network environment, it is
suggested that you use WAN port (port 5).
Step 6: Connect the included power cord to an AC 100-240V wall outlet. When the VPN router receives
power, the Power LED should remain solid Green.