User's Manual

Enterprise 5-Port 10/100/1000T VPN Security Router
VR-300 series
- 81 -
Object
Description
Load Balance Weight
Load Balance Weight allows you to set a relative weight (from 1 - 10)
for each WAN port.
External Connection
Detection
Enable to detect the status of WAN connection.
Detect Interval
Set the detect interval as you need.
The recommended value is 5 (default).
Detect Link Up
Threshold
Set the times for detecting link up.
The recommended value is 8 (default).
Detect Link Down
Threshold
Set the times for detecting link down.
The recommended value is 3 (default).
Custom Detect Host
The host is used to check whether the internet connection is alive or
not.
4.5.3 LAN Setup
This page is used to configure the parameters for local area network which connects to the LAN port of
your router as shown in Figure 4-30. Here you may change the settings for IP address, subnet mask,
DHCP, etc.
Figure 4-30: LAN Setup
Object
Description
IP Address The LAN IP address of the router and default is 192.168.1.1.
Net Mask Default is 255.255.255.0.