User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Introduction
- Chapter 3. Preparation
- Chapter 4. Web-based Management
- Appendix A: DDNS Application
Enterprise 5-Port 10/100/1000T VPN Security Router
VR-300 series
- 83 -
Figure 4-32: Routing setup
Routing tables contain a list of IP addresses. Each IP address identifies a remote router (or other
network gateway) that the local router is configured to recognize. For each IP address, the routing table
additionally stores a network mask and other data that specifies the destination IP address ranges that
remote device will accept.
Object
Description
Type
There are two types: Host and Net.
When the Net type is selected, user does not need to input the
Gateway.
Destination
The network or host IP address desired to access.
Net Mask
The subnet mask of destination IP.
Gateway
The gateway is the router or host’s IP address to which packet was
sent. It must be the same network segment with the WAN or LAN
port.
Interface
Select the interface that the IP packet must use to transmit out of the
router when this route is used.
Comment
Enter any words for recognition.