Datasheet

WDAP-1800AX
1
Dual Band 802.11ax 1800Mbps Outdoor Wireless AP
Super High Speed and Wide Coverage
PLANET WDAP-1800AX 1800Mbps Dual Band 802.11ax Wireless AP, supporting
MU-MIMO, Wave 2.0, OFDMA, Seamless Roaming, Beamforming and BSS
Coloring technology, provides a maximum wireless speed of 1200Mbps in the 5GHz
band and 600Mbps in the 2.4GHz band. It comes with the IP67-rated aluminum
case protected from contact with harmful dust and water. By connecting high-gain
antenna through the exible N-type connectors, the system integrator can easily assist
customers in achieving various outdoor long-distance applications under rough weather
in any harsh environment. The WDAP-1800AX also offers the 20KV surge protection
for wire cable interface that can greatly improve the durability of the product.
Industrial Wireless LAN and LAN
• Compliant with the IEEE 802.11a/b/g/n/ac/ax wireless
technology
• 802.11ax 2T2R architecture with data rate of up to 1800Mbps
(600Mbps in 2.4GHz and 1200Mbps in 5GHz)
• Equipped with 10/100/1000Mbps RJ45 port with auto MDI/
MDI-X supported
• One reset button and power LED indicator
RF Interface Characteristics
• Built-in four N-type antenna connectors
• High output power with multiply-adjustable transmit power
control
Outdoor Environmental Characteristics
• IP67 rating, IEEE 802.3at PoE design
• Rugged protection with aluminum extrusion case and ground
terminal
• 20KV surge protection for wire cable interface
• Operating temperature: -40~70 degrees C
Multiple Operation Modes and Wireless
Features
• Multiple operation modes: AP, gateway and repeater
• Supports OFDMA (orthogonal frequency division multiple
access)
• Supports MU-MIMO (multi-user multiple-input multiple-output),
Wave 2.0, Beamforming and BSS Coloring
• WMM (Wi-Fi multimedia) provides higher priority to
multimedia transmitting over wireless
• Coverage threshold to limit the weak signal of clients
occupying session
• Real-time Wi-Fi channel analysis chart and client limit control
for better performance
• Support Terminal Seamless Roaming with 802.11k, 802.11v,
and 802.11r
Benets of MU-MIMO, Wave 2, OFDMA, Seamless Roaming, Beamforming
and BSS Coloring
The WDAP-1800AX can be installed in public areas such as hotspots, airports and
conferences as OFDMA, a multi-user version of OFDM, enables the concurrent AP
to communicate (uplink and downlink) with multiple clients by assigning subsets of
subcarriers called resource units (RUs) to the individual clients. With MU-MIMO and
Seamless Roaming technologies, it provides a better Wi-Fi user experience, reducing
the likelihood of users turning off Wi-Fi and putting more load on the cellular network.
Beamforming is to improve your Wi-Fi signal when you are far away from your router.
The BSS color is a numerical identifier of the BSS. 802.11ax radios that are able to
differentiate between BSSs using BSS color identier when other radios transmit on the
same channel.