User's Manual

User Manual of WDAP-C1800AX &WDAP-1800AX
- 34 -
Figure 4-26: WAN
Object Description
WAN Access Type
Please select the corresponding WAN Access Type for the Internet,
and fill out the correct parameters from your local ISP in the fields
which appear below.
Static
Select Static IP Address if all the Internet ports’ IP
information is provided to you by your ISP (Internet
Service Provider). You will need to enter the IP
address, Netmask, Gateway, and DNS Server provided
to you by your ISP.
Each IP address entered in the fields must be in the
appropriate IP form, which are four octets separated by
a dot (x.x.x.x). The router will not accept the IP address
if it is not in this format.
IP Address
Enter the IP address assigned by your ISP.
Netmask
Enter the Subnet Mask assigned by your ISP.
Gateway