User's Manual

User Manual of WDAP-C1800AX &WDAP-1800AX
- 36 -
4.2.3 UpnP
Figure 4-28: UpnP
Object Description
UpnP
Set the function as enable or disable
4.2.4 Routing
Please refer to the following sections for the details as shown in Figures 4-30 and 31.
Figure 4-29: Routing table
Figure 4-30: Routing setup
Routing tables contain a list of IP addresses. Each IP address identifies a remote router (or other
network gateway) that the local router is configured to recognize. For each IP address, the routing table
additionally stores a network mask and other data that specifies the destination IP address ranges that