User's Manual

User Manual of WDAP-C1800AX &WDAP-1800AX
- 40 -
Figure 4-34: IPv6 WAN setup
Object Description
Connection Type
Select IPv6 WAN type either by using DHCP or Static.
IPv6 Address
Enter the WAN IPv6 address.
Subnet Prefix Length
Enter the subnet prefix length.
Default Gateway
Enter the default gateway of the WAN port.
IPv6 DNS Server 1
Input a specific DNS server
IPv6 DNS Server 2
Input a specific DNS server
4.2.9 DHCP
The DHCP service allows you to control the IP address configuration of all your network devices. When
a client (host or other device such as networked printer, etc.) joins your network it will automatically get
a valid IP address from a range of addresses and other settings from the DHCP service. The client
must be configured to use DHCP; this is something called "automatic network configuration" and is
often the default setting. The setup is shown in Figure 4-35.