User's Manual

User Manual of WDAP-C1800AX &WDAP-1800AX
- 61 -
RTS Threshold Enable or Disable RTS/CTS protocol. It can be used in the
following scenarios and used by Stations or Wireless AP.
1) When medium is too noisy or lots of interferences are present.
If the AP/Station cannot get a chance to send a packet, the
RTS/CTS mechanism can be initiated to get the packet sent.
2) In mixed mode, the hidden node problem can be avoided.
The default value is 2347
4.4.6 Wi-Fi Statistics
This page shows the statistics of Wi-Fi traffic.