Quick Guide

– 1 – – 2 –
– 3 –
– 4 –
2. Physical Introduction
Front Panel of WDRT-1800AX
5GHz
Power
2.4GHz
Rear Panel of WDRT-1800AX
WPS (Press for 1 second)
LAN1~4
WAN
Reset (Press for 5 seconds)
Power
LAN4 LAN3 LAN2 LAN1 WAN WPS/RST PWR
3. Hardware Installation
Step 1: Locate the WDRT-1800AX in an optimum place, and adjust the
antenna for the best coverage.
LAN4 LAN3 LAN2 LAN1 WAN WPS/RST PWR
Step 2: Connect the Power Adapter provided in the package to the
WDRT-1800AX. The Power LED on the front panel will turn on
accordingly.
Power
Adapter
Power
LAN4 LAN3 LAN2 LAN1 WAN WPS/RST PWR
Step 3: Follow the gure below to connect the network devices. It
depends on your network environment to connect the WAN port
to a Cable/xDSL modem, or the Ethernet directly in your place.
WAN
Port
LAN4 LAN3 LAN2 LAN1 WAN WPS/RST PWR
PC
LAN
Ports
RJ45 RJ45
Power
Adapter
Power
Cable/
xDSL Modem
xPON ONT
Phone
Jack
RJ11
Fiber
or
FTTx
1. Package Contents
►
WDRT-1800AX
Dual Band 802.11ax 1800Mbps
Wireless Gigabit Router
Thank you for choosing PLANET WDRT-1800AX. Before installing the
router, please verify the contents inside the package box.
WDRT-1800AX Quick Guide Ethernet Cable Power Adapter
Note
Ifthere isanyitem missingordamaged, pleasecontact the
seller immediately.