Datasheet

WGR-500-4P
4
PoE
1000BASE-TX UTP with PoE
6 Watts 6 Watts 12 Watts 12 Watts
Total Consumption: 36 watts / hr
PoE
PoE PoE
PoE
Power
On
Power
On
Power
On
Power
On
5 PM8 AM
5 PM 8 AM
6 Watts 6 Watts 12 Watts 12 Watts
Save 24 watts / hr during off-business hours
PoE PoE
Total Saved = 10800watts / month
PoE PoE
Power
On
Power
Off
Power
Off
Power
Off
Built-in Unique PoE Functions for Powered Devices Management
The WGR-500-4P is capable of having a maximum of up to 120 watts of power output and can deliver up to 36W for each port. It also features the following
special PoE management functions:
■
PoE usage monitoring
With PoE usage monitoring, it can show the PoE loading of each port, total PoE power usage and system status, such as overload, low voltage,
over voltage and high temperature. User can obtain detailed information about the real-time PoE working condition of the WGR-500-4P directly.
■
PoE schedule
Under the trend of energy saving worldwide and contributing to environmental protection, the WGR-500-4P can effectively control the power
supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for
each PoE port during specied time intervals and it is a powerful function to help SMBs or enterprises save power and budget. It also increases
security by powering off PDs that should not be in use during non-business hours.
■
Scheduled power recycling
The WGR-500-4P allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specic time each week.
Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overow.
■
PD alive check
The WGR-500-4P can be congured to monitor connected PD status in real time via ping action. Once the PD stops working and responding,
the WGR-500-4P will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE
port resetting the PD’s power source and reducing administrator management burden.
PT PoE Camera
Ping Request
Ping Request
Check alive status for 3 times
Restart PoE device if without response
Ping Echo
No Response......
PD Alive!!
Step 1
Step 3
Step 2
Step 4
ON
PoE
ON
ON
PoE
OFF
PD Status
Good!!
Alarm Notification
Simplified Cluster Management with 4 Steps
Group 1 AP 1
AP 2 Group 2
Step 1
Search
Step 2
Add Profile
Step 4
Map It
Step 3
Batch Provisioning
AP
Found
*Note: The feature will be available via rmware upgrade.