Datasheet

WGR-500-4P
6
Specications
Product
WGR-500-4P
Hardware Specications
Interface
LAN 4 x 10/100/1000 BASE-T, auto-negotiation, auto MDI/MDI-X RJ45 port
WAN 1 x 10/100/1000 BASE-T, auto-negotiation, auto MDI/MDI-X RJ45 port
USB port 1 x USB 3.0 for back-up and restore of conguration le
Dip Switch For router and switch mode
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
ESD Protection 6KV DC
Enclosure IP30 metal case
Installation DIN-rail or wall mounting
Connector
Removable 3-pin terminal block for power input
- Pin 1/2 for Power (Pin 1: V+ / Pin 2: V-)
- Pin 3 for earth ground
DC power jack with 2.1mm central pole
LED Indicator
System:
Internet (Green)
PWR (Green)
SYS (Green)
Per 10/100/1000T RJ45 Ports:
10/100 LNK/ACT (Green)
1000 LNK/ACT (Orange)
PoE Usage:
120W (Orange)
90W (Orange)
60W (Orange)
30W (Orange)
Dimensions (W x D x H) 180 x 140 x 24.4 mm
Weight 714 g
Power Requirements Dual 48~56V DC (>51V DC for PoE+ output recommended)
Power Consumption
Max. 7.3 watts/24.9 BTU (Power on without any connection)
Max. 132 watts/450 BTU (Full loading with PoE)
Router Features
Internet Connection Type
Shares data and Internet access for users, supporting the following internet accesses:
■ PPPoE
■ Static IP
■ Dynamic IP
Routing Protocol
Static routing
RIPv1/2
Security
DOS protection
MAC/IP/Port/URL ltering
Protocol/Feature
802.1Q tag-based VLAN
802.1d spanning tree
QoS
NAT and HW NAT
Port Forwarding
DMZ
UPnP and PLANET DDNS
System Management
Web-based (HTTP) conguration
SNTP time synchronization
System log supports remote log
SNMP v1, v2c
Power Over Ethernet
PoE Standard IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type End-span
PoE Power Output
IEEE 802.3af Standard
- Per port 48V~51V DC (depending on the power supply), max. 15.4 watts
IEEE 802.3at Standard
- Per port 51V~56V DC (depending on the power supply), max. 36 watts
Power Pin Assignment 1/2(+), 3/6(-)
PoE Power Budget 120W maximum (depending on power input)
Max. Number of Class 4 PDs 4
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Stability Testing
IEC60068-2-32 (free fall)
IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)