Datasheet

WGS-4215-8T
6
Industrial Area Switch for Data Collection and Forwarding
The WGS-4215-8T is equipped with 8 10/100/1000Mbps ports offering auto MDI/MDIX feature providing 16Gbps non-blocking switch fabric and the 8K MAC
address table so that the WGS-4215-8T can perform wire-speed packets transfer without the risk of packet loss. The WGS-4215-8T with the slim type IP30
metal case is ideal for most heavy industrial demanding environments.
WGS-4215-8T
Robotic Automation System
1000BASE-T UTP
Control Room
IP camera IP camera
Robotic Automation
Specications
Product
WGS-4215-8T
Hardware Specications
Copper Ports 8-Port 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
LED
Power LED:
Power (Green)
10/100/1000BASE-TX Port:
10/100 LNK/ACT (Orange)
1000 LNK/ACT (Green)
Connector
■ Removable 3-pin terminal block for power input
- Pin 1/2 for power (Pin 1: V+ / Pin 2: V-)
- Pin 3 for earth ground
■ DC power jack with 2.0mm central pole
Power Requirements
24V AC,1A (max.)
12~48V DC,1A (max.)
Power Consumption/ Dissipation Max. 7 watts/24 BTU
Dimensions (W x D x H) 148 x 25 x 134 mm
Weight 496g
ESD Protection
Contact Discharge 4KV DC
Air Discharge 8KV DC
Enclosure IP30 metal
Installation Wall mount, magnetic wall mount and DIN-rail kit
Switching Specications
Switch Architecture Store-and-Forward
Switch Fabric 16Gbps/non-blocking
Switch Throughput@64 bytes 11.9Mpps @64 bytes
MAC Address Table 8K entries
Shared Data Buffer 4.1 megabits
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame 10 Kbytes
Layer 2 Functions
Port Mirroring
TX/RX/Both
Many-to-1 monitor