WGS-5225-8P2SV Datasheet
WGS-5225-8P2SV
1
Wall-mount PoE Managed Switch with Advanced L2+/L4 Switching and
Security
PLANET WGS-5225-8P2SV is an Industrial Wall-mount PoE Managed Switch with
LCD Touch Screen featuring PLANET intelligent PoE functions to improve the
availability of industrial applications. It provides IPv6/IPv4 dual stack management
and built-in L2+/L4 Gigabit switching engine along with eight 10/100/1000BASE-T
ports featuring 36-watt PoE and two additional 1000BASE-X SFP ports. With
a total power budget of up to 240 watts for different kinds of PoE applications,
and featuring networking speed and operating temperature ranging from -20 to 70
degrees C in a compact but rugged IP30 metal housing, the WGS-5225-8P2SV is
an ideal solution to meet the demand for the following network applications:
■ Building/Home automation network
■ Internet of things (IoT)
■ IP surveillance
Intuitive LCD Control
The WGS-5225-8P2SV comes with an intuitive touch panel on its front panel that
facilitates the Ethernet PoE PD management that greatly promotes management
efficiency in large-scale networks, such as enterprises, hotels, shopping malls,
government buildings, and other public areas. It also features the following special
management and status functions:
Industrial L2+ 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X
SFP Wall-mount Managed Switch with LCD Touch Screen
Physical Port
• 8 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with
IEEE 802.3at PoE+ Injector
• 2 100/1000BASE-X mini-GBIC/SFP slots for SFP type
auto detection
Power over Ethernet
• Complies with IEEE 802.3at Power over Ethernet Plus/end-
span PSE
• Up to 8 IEEE 802.3af/802.3at devices powered
• Supports PoE power up to 36 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between
ports
• Remote power feeding up to 100m
• PoE management features
–
Total PoE power budget control
–
Per port PoE function enable/disable
–
PoE admin-mode control
–
PoE port power feeding priority
–
Per PoE port power limit
–
PD classication detection
• Intelligent PoE features
–
Temperature threshold control
–
PoE usage threshold control
–
PD alive check
–
PoE schedule
Industrial Case and Installation
• Compact size with xed wall-mounted, magnetic wall-
mounted or DIN-rail design
• IP30 metal case
• Supports -20 to 70 degrees C operating temperature
• Supports ESD 6KV DC Ethernet protection
• Dual power input design
–
48V~56V DC wide power input with polarity reverse
protect function
–
3-pin terminal block or DC jack connector
Layer 2 Features
• Prevents packet loss with back pressure (half-duplex) and
IEEE 802.3x pause frame ow control (full-duplex)
• High performance of Store-and-Forward architecture, and
runt/CRC ltering eliminates erroneous packets to optimize
the network bandwidth
DC Input Range
48-56V
V+
Ground
SYS
PWR
R.O.
Ring
SFP
9
10
ACTLNK
ACTLNK
1000
100
SFP
9 10
PoE In-use
LNK/ACT
5 731
6 842
PoE
WGS-5225-8P2SV
ManagedFiberPoE+ Magnet Mounting
Smart LCD
DC Input Range
48-56V
V+
Ground
10/100/1000BASE-T RJ45 Ports 2 100/1000BASE-X SFP Ports
DC Plug-in
3-pin Terminal Block