Datasheet

ManualsBrandsPLANET Technology ManualsIndustrial Power over EthernetIndustrial 8-Port 10/100/1000T Wall-mount Managed Switch with 4-Port PoE+ (-40~75 degrees C)

WGS-804HPT

Industrial 8-Port 10/100/1000T Wall-mounted Managed

Switch with 4-Port PoE+

Easily-deployed and Expanded Network

Designed to be installed in a wall enclosure or simply mounted on a wall at any

convenient location, PLANET WGS-804HPT, an innovative, Industrial 8-port

10/100/1000T Wall-mounted Managed Switch with 4-Port PoE+, offers IPv6/IPv4 dual

stack management, intelligent Layer 2 management functions, and user-friendly

interface. The WGS-804HPT is able to operate reliably, stably and quietly in any

environment without affecting its performance. With a total power budget of up to 144

watts for different kinds of PoE applications and featuring ultra networking speed and

operating temperature ranging from -40 to 75 degrees C in a compact but rugged IP30

metal housing, the WGS-804HPT is an ideal solution to meeting the demand for the

following network applications:

■ Building/Home automation network

■ Internet of things (IoT)

■ IP surveillance

■ Wireless LAN

Physical Port

• 8-Port 10/100/1000BASE-T Gigabit RJ45 copper with 4-Port

IEEE 802.3at/af PoE Injector function (Port-1 to Port-4)

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus, end-

span PSE

• Backward compatible with IEEE 802.3af Power over Ethernet

• Up to 4 ports of IEEE 802.3af/802.3at devices powered

• Supports PoE power up to 36 watts for each PoE port

• Auto detects powered device (PD)

• Circuit protection prevents power interference between ports

• Remote power feeding up to 100 meters in standard mode

and 250m in extend mode

• PoE management

– Total PoE power budget control

– Per port PoE function enable/disable

– PoE port power feeding priority

– Per PoE port power limitation

– PD classication detection

– PD alive check

– PoE schedule

Industrial Case and Installation

• Compact size, wall-mounted, magnetic wall mount and DIN-rail

designs

• IP30 metal case

• Supports -40 to 75 degrees C operating temperature

• Supports ESD 8KV DC Ethernet protection

• Redundant power design

– 48V~56V DC wide power input

– -3-pin terminal block or DC jack connector

Switching

• Hardware-based 10/100Mbps, half/full duplex and 1000Mbps

full duplex mode, ow control and auto-negotiation and auto

MDI/MDI-X

• Features Store-and-Forward mode with wire-speed ltering

and forwarding rates

• IEEE 802.3x ow control for full duplex operation and back

pressure for half duplex operation

• 8K MAC address table size

• 10K jumbo frame

• Automatic address learning and address aging

• Supports CSMA/CD protocol

3 421

7 865

Data+ Power

Data

120W

PoE Usage

90W

60W

30W

PWR

ACTLNK

1000

ACTLNK

PoE-in-Use

Industrial 8-Port Gigabit Managed

Switch with 4-Port PoE+

WGS-804HPT

ManagedPoE Magnet Mounting

V+

Ground

DC Input Range

48-56V

, 4A max.

802.3at PoE+ 10/100/1000BASE-T RJ45 Port

10/100/1000BASE-T RJ45 PortDC Jack

Power LED

PoE Power Usage

3-pin Terminal Block

3 421

Data+ Power

Data

120W

PoE Usage

90W

60W

30W

PWR

ACTLNK

1000

ACTLNK

PoE-in-Use

Industrial 8-Port Gigabit Managed

Switch with 4-Port PoE+

WGS-804HPT

ManagedPoE Magnet Mounting

V+

Ground

DC Input Range

48-56V

, 4A max.

Summary of content (11 pages)

PAGE 1
WGS-804HPT Industrial 8-Port 10/100/1000T Wall-mounted Managed Switch with 4-Port PoE+ Physical Port • 8-Port 10/100/1000BASE-T Gigabit RJ45 copper with 4-Port IEEE 802.3at/af PoE Injector function (Port-1 to Port-4) Power over Ethernet • Complies with IEEE 802.3at Power over Ethernet Plus, endspan PSE • Backward compatible with IEEE 802.3af Power over Ethernet • Up to 4 ports of IEEE 802.3af/802.
PAGE 2
WGS-804HPT Cybersecurity Network Solution to Minimize Security Risks The WGS-804HPT supports SSHv2 and TLSv1.2 protocols to provide strong protection against advanced threats. It includes a range of cybersecurity features such as DHCP Snooping, IP Source Guard, Dynamic ARP Inspection, 802.1x port-based Layer 2 Features • Supports VLAN –– IEEE 802.1Q tagged VLAN –– Provider bridging (VLAN Q-in-Q, IEEE 802.
PAGE 3
WGS-804HPT Scheduled Power Recycling The WGS-804HPT allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.
PAGE 4
WGS-804HPT PoE Usage Monitoring and Intelligent LED Indicator for Real-time PoE Usage Via the power usage chart in the web management interface, the WGS-804HPT enables the administrator to monitor the status of the power usage of the connected PDs in real time. Thus, it greatly enhances the management efficiency of the facilities. Moreover, the WGS-804HPT helps users to monitor the current status of PoE power usage easily and efficiently via its advanced LED indication.
PAGE 5
WGS-804HPT IPv6/IPv4 Dual Stack Management Supporting both IPv6 and IPv4 protocols, the WGS-804HPT helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up. Robust Layer 2 Features The WGS-804HPT can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.
PAGE 6
WGS-804HPT Friendly and Secure Management For efficient management, the WGS-804HPT is equipped with Command line, Web and SNMP management interfaces. ■ With the built-in Web-based management interface, the WGS-804HPT offers an easy-to-use, platform-independent management and configuration facility. ■ For text-based management, it can be accessed via Telnet and the console port. ■ By supporting the standard SNMP protocol, the switch can be managed via any SNMP-based management software.
PAGE 7
WGS-804HPT Security Building Automation Switch Suitable for buildings where security is strictly to be enforced, the WGS-804HPT Industrial Wall-mount Managed Switch offers a comprehensive Layer 2 to Layer 4 Access Control List (ACL). The switch can restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. With the WGS-804HPT, a tightly-controlled network can be easily had in no time.
PAGE 8
WGS-804HPT Specifications Product WGS-804HPT Hardware Specifications Copper Ports 8-Port 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports PoE Inject Port 4-Port with 802.3af/802.3at PoE injector function (Port-1 to Port-4) Reset Button < 5 sec: System reboot > 5 sec: Factory default ■ Removable 3-pin terminal block for power input - Pin 1/2 for Power (Pin 1: V+ / Pin 2: V-) Connector - Pin 3 for earth ground ■ DC power jack with 2.0mm central pole Power Requirements 48~56V DC, 3A (max.
PAGE 9
WGS-804HPT Layer 2 Functions Port Mirroring TX/RX/Both Many-to-1 monitor 802.1Q tagged VLAN Up to 256 VLAN groups, out of 4094 VLAN IDs 802.1ad Q-in-Q tunneling (VLAN stacking) VLAN Voice VLAN Protocol VLAN Private VLAN (Protected port) GVRP Management VLAN Link Aggregation IEEE 802.3ad LACP and static trunk Supports 4 groups with 4 ports per trunk STP, IEEE 802.1D Spanning Tree Protocol Spanning Tree Protocol RSTP, IEEE 802.1w Rapid Spanning Tree Protocol MSTP, IEEE 802.
PAGE 10
WGS-804HPT Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE IEC 60068-2-32 (free fall) Stability Testing IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000BASE-T IEEE 802.3x Flow Control and Back Pressure IEEE 802.3ad Port Trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.
PAGE 11
WGS-804HPT Dimensions 118.00 24.20 24.20 148.00 133.00 Data+ Power 1 2 3 4 PoE-in-Use LNK ACT PoE Usage 120W 90W 60W 30W PWR 134.00 118.00 6.00 Industrial 8-Port Gigabit Managed Switch with 4-Port PoE+ Ground WGS-804HPT V+ PoE Managed Magnet Mounting 1000 LNK DC Input Range 48-56V , 4A max. ACT Data 5 6 7 8 118.