Datasheet

WGS-804HPT
8
Specications
Product
WGS-804HPT
Hardware Specications
Copper Ports 8-Port 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
PoE Inject Port 4-Port with 802.3af/802.3at PoE injector function (Port-1 to Port-4)
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
Connector
■ Removable 3-pin terminal block for power input
- Pin 1/2 for Power (Pin 1: V+ / Pin 2: V-)
- Pin 3 for earth ground
■ DC power jack with 2.0mm central pole
Power Requirements 48~56V DC, 3A (max.)
Power Consumption/ Dissipation Max. 152 watts/519 BTU
Dimensions (W x D x H) 148 x 25 x 134 mm
Weight 532g
ESD Protection
Contact Discharge 4KV DC
Air Discharge 8KV DC
Enclosure IP30 metal
Installation Wall mount, magnetic wall mount and DIN-rail kit
LED
Power LED:
Power (Green)
PoE Power Usage LED:
30W, 60W, 90W, 120W (Green)
PoE Port(Port-1 to Port-4) :
PoE-in-Use (Amber)
LNK/ACT (Green)
10/100/1000BASE-TX Port (Port-5 to Port-8) :
1000 (Green)
LNK/ACT (Green)
Switch Specications
Switch Architecture Store-and-Forward
Switch Fabric 16Gbps/non-blocking
Switch Throughput@64 bytes 11.9Mpps @64 bytes
MAC Address Table 8K entries
Shared Data Buffer 4.1 megabits
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame 10KB
Power over Ethernet
PoE Standard IEEE 802.3af/802.3at Power over Ethernet PSE
PoE Power Supply Type End-span
PoE Power Output
IEEE 802.3af Standard
- Per port 48V~56V DC (depending on the power supply), max. 15.4 watts
IEEE 802.3at Standard
- Per port 50V~56V DC (depending on the power supply), max. 36 watts
Power Pin Assignment 1/2(+), 3/6(-)
PoE Power Budget 144 watts (depending on power input)
Max. Number of Class 2 PDs 4
Max. Number of Class 3 PDs 4
Max. Number of Class 4 PDs 4
PoE Management Functions
PoE Management
PD Alive Check
Scheduled Power Recycling
PoE Schedule
PoE Usage Monitoring
PoE Extension
Active PoE Device Live Detection Yes
PoE Power Recycling Yes, daily or predened schedule
PoE Schedule 4 schedule proles
PoE Extend Mode Yes, max. up to 250 meters