Intelligent Gigabit/Fast Ethernet Switch User's Manual

- 38 -
Setup procedure:
1. Press “ Edit” to input the system name, system contact, system location.
2. After setup completed, press” Ctrl-A” to “Action menu” and choose “save” to save the current
configure. The screen in Figure 4-57 appears.
Figure 4-57 System Options configuration save successfully screen
3. Press any key for return to the previous menu.
4.3.3.2.2 Community Strings
Allow adding SNMP community name.
Figure 4-58 SNMP Community configuration screen
Setup procedure:
1. Press “Add” to enter into “add SNMP community” screen, then press “Edit” a new community
name and adjust the write access mode..
2. After setup completed, press” Ctrl-A” to “Action menu” and choose “save” to save the current
configure. The screen in Figure 4-59 appears.