Intelligent Gigabit/Fast Ethernet Switch User's Manual

- 69 -
5.4.7.3 Port Based VLAN
Choose Port Based VLAN function operation Mode from Switch Settings. The following screen in
Figure 5-30 appears.
Figure 5-30 WGSD-1020 Port Based VLAN Web Page screen
Create a new VLAN group and add member ports procedure:
1. Click “Add” to create a new VLAN group. The following screen in Figure 5-31 appears.
2. Type a name for the new VLAN and VLAN ID (between 1- 4094).
3. From the available ports box, select ports to add to the Switch and click “Add”
4. Click “Apply” to take effect. The following screen in Figure 5-32 appears.