Quick Guide

The above steps introduce the simple installations and configurations of
the device. For further configurations, please refer to the installation
guide, which can be downloaded from the website.
WL-LTNA:
http://www.planet.com.tw/en/support/download.php?type1=4&model
=39530&type=2
If you have further questions, please contact the local dealer or
distributor where you purchased this product.
PLANET Technology Corp.
10F., No 96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan
1. Package Contents
2. Hardware Specifications
– 1 – – 2 –
– 3 – – 4 –
3. Hardware Installation
2011-E30250-001
Refer to the figure below to install the WL-LTNA between the external
antenna and Outdoor wireless AP.
※ Please remember to finish grounding by consulting the local
electrical experts.
WL-LTNA x1
(Grounding wire is not included)
Thank you for choosing PLANET Outdoor Wireless Product. Before
installing, please verify the contents inside the package box.
WL-LTNA
Quick Installation Guide
2.4/5GHz Lightning Arrester (N-male to N-female)
Further Information:
IMPORTANT SAFETY PRECAUTIONS:
1) Please check the site for possible hazards before
beginning any installation.
2) Try to keep the antenna connection a distance from the
power line. People may be injured or killed if they touch or
hold any part of the equipment that comes in contact with
the power line.
AP
Antenna/RF Cable
Lightning Arrestor
N(F) Connector
N(F) Connector
N(M) Connector
N(M) Connector
Ground
2
1
Frequency Range 0 ~ 6GHz
Gain Loss ≤ 0.2dB
Maximum Withstand Current 20kA
Connector Type N-female (Jack) to N-male (Plug)
3) Make sure all towers and masts are securely grounded,
and electrical cables connected to antennas have
grounded lightning arresters.
4) Do not connect when a storm is near or when
transmissions are occurring.