User Manual

User Manual of WNAP-6315
-6-
Supports UPnP
Supports IGMP Proxy
Supports 802.1d STP (Spanning Tree)
WAN
 Static IP
 DHCP (Dynamic IP)
 PPPoE
 PPTP
 L2TP
VPN Passthrough
 PPTP
 L2TP
 IPSec
 IPv6
Operation Mode
 Gateway
 Bridge
 WISP
NAT firewall with SPI (Stateful Packet Inspection)
Built-in NAT server supporting virtual server and DMZ
Firewall
Built-in firewall with port/ IP address/ MAC/ URL filtering
Wireless Mode
 AP Bridge
 AP Router
 Client Bridge
 Client Router (WISP)
 WDS PtP
 WDS PtMP
 WDS Repeater
 Universal Repeater (AP+Client)
Max. SSID
Up to 5
Channel Width
20MHz / 40MHz
Wireless Isolation
Enable to isolate each connected wireless client so that they cannot access
mutually
Encryption Type
64/128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X
Wireless LAN ACL (Access Control List) filtering
Wireless MAC address filtering
Supports WPS (Wi-Fi Protected Setup )
Wireless Security
Enable/Disable SSID Broadcast
Max. Wireless Clients
20
Max. WDS APs
8
Max. Wired Clients
253
WMM
Supports Wi-Fi multimedia
QoS
Supports Quality of Service for bandwidth control
NTP
Network Time Management
Self Healing
Supports Schedule Reboot
B/G Protection Mode
Supports protection mechanism to prevent collisions among 802.11b/g modes
IAPP Roaming
Supports IAPP (Inter Access Point Protocol) roaming