User Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the AP
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the AP
- Chapter 6. Quick Connection to a Wireless Network
- Appendix A: Planet Smart Discovery Utility
- Appendix B: Troubleshooting
- Appendix C: Frequently Asked Questions
User Manual of WNAP-6315
-27-
5.2 Operation Mode
This page shows the current operation mode, and users can set different modes to LAN and WLAN interface for
NAT and bridging function on the WNAP-6315.
Figure 5-9 Operation Mode
The page includes the following fields:
Object Description
Gateway
In this mode, the device enables multi-user to share Internet via
ADSL/Cable Modem. The wireless port shares the same IP to ISP through
Ethernet WAN port. The Wireless port acts the same as a LAN port while
at AP Router mode.
Bridge
In this mode, the device can be used to combine multiple local networks
together to the same one via wireless connections, especially for a home
or office where separated networks can't be connected easily together