User Manual

User Manual of WNAP-6315
-33-
Enter the Subnet Mask.
Server IP Address
Enter the L2TP Server IP address provided by your ISP.
User Name
Enter your L2TP user name.
Password
Enter your L2TP password.
Host Name
This option specifies the Host Name of the Wireless AP.
MTU Size
The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is
1492 Bytes. It is not recommended that you change the default MTU Size unless
required by your ISP.
Attain DNS
Automatically
Select “Attain DNS Automatically”, the DNS servers will be assigned dynamically
from your ISP.
Set DNS Manually
If your ISP gives you one or two DNS addresses, select Set DNS Manually and enter
the primary and secondary addresses into the correct fields.
Clone MAC
Address
You can input a MAC address here for using clone function.
Enable uPNP
Check to disable/enable uPNP function (default = disabled)
Enable IGMP Proxy
Check to disable/enable IGMP function (default = enabled)
Enable Ping Access
on WAN
Check to enable the Ping Access on WAN function (default = disabled)
Enable Web Server
Access on WAN
Check to enable the Web Server Access on WAN function (default = disabled)
Enable IPsec pass
through on VPN
connection
Check to enable the IPsec pass through on VPN connection function (default =
enabled)
Enable PPTP pass
through on VPN
connection
Check to enable the PPTP pass through on VPN connection function (default =
enabled)
Enable L2TP pass
through on VPN
connection
Check to enable the L2TP pass through on VPN connection function (default =
enabled)
Enable IPv6 pass
through on VPN
connection
Check to enable the IPv6 pass through on VPN connection function (default =
disabled)