User Manual

User Manual of WNAP-7206
-104-
Figure 5-8-1-1 Virtual Servers
To setup a virtual server entry, you can follow these steps:
1. Click the Add New... button.
2. Select the service you want to use from the Common Service Port list. If the Common Service Port menu
does not list the service that you want to use, enter the number of the service port or service port range in
the Service Port box.
3. Enter the IP address of the computer running the service application in the IP Address box.
4. Select the protocol used for this application in the Protocol box: TCP, UDP, or All.
5. Select the Enabled option in the Status pull-down list.
6. Click the Save button.
The page includes the following fields:
Object Description
 Service Port
The numbers of External Ports. You can enter a service port or a
range of service ports (the format is XXX - YYY, XXX is Start port,
YYY is End port).
 IP Address
The IP address of the PC running the service application.
 Protocol
The protocol used for this application, either TCP, UDP, or All (all