User Manual

User Manual of WNAP-7206
-120-
The page includes the following fields:
Object Description
 Enable Internet
Access Control
Select the check box to enable the Internet Access Control
function, and then the Default Filter Policy can take effect.
 Rule Name
Here displays the name of the rule and this name is unique.
 Host
Here displays the host selected in the corresponding rule.
 Target
Here displays the target selected in the corresponding rule.
 Schedule
Here displays the schedule selected in the corresponding rule.
 Action
Here displays the action the Device takes to deal with the packets.
It could be Allow or Deny. Allow means that the Device permits
the packets to go through the Device. Deny means that the Device
rejects the packets to go through the Device.
 Status
This field displays the status of the rule. Enabled means the rule
will take effect, Disabled means the rule will not take effect.
 Modify
Here you can edit or delete an existing rule.
 Add New...
Click the Add New... button to add a new host entry.
 Enable All
Click the Enable All button to enable all the rules in the list.
 Disable All
Click the Disable All button to disable all the rules in the list.
 Delete All
Click the Delete All button to delete all the entries in the table.
 Next
Click the Next button to go to the next page.
 Previous
Click the Previous button return to the previous page.
 Rule Name
In this field, create a name for the rule. Note that this name should be
unique.
 Host
In this field, select a host from the drop-down list for the rule.
 Target
In this filed, select a target from the drop-down list for the rule. The
default value is Any Target.
 Schedule
In this field, select a schedule from the drop-down list for the rule.
The default value is Anytime.
 Action
In this field, there are two options, Allow or Deny. Allow means
the Router permits the packets to go through the Router. Deny
means the Router rejects the packets to go through the Router.
 Status
In this field, there are two options, Enable or Disable. Select
Enable so that the rule will take effect. Select Disable so that the
rule won't take effect.
 Save
Click the Save button to save the changes.
 Back
Click the Back button to back to the previous page.