User Manual

User Manual of WNAP-7206
-123-
 Next
Click the Next button to go to the next page.
 Previous
Click the Previous button return to the previous page.
 Mode
Here are two options, IP Address and Domain Name. You can choose
either of them from the drop-down list.
 IP Address
Enter the IP address (or address range) of the target (targets) in
dotted-decimal format, for example 192.168.1.23.
 Target Port
Specify the port or port range for the target. For some common service
ports, you can make use of the Common Service Port item below.
 Protocol
Here are four options, All, TCP, UDP, and ICMP. Select one of them from
the drop-down list for the target.
 Common Service
Port
Here lists some common service ports. Select one from the drop-down list,
and the corresponding port number will be filled in the Target Port field
automatically. For example, if you select "FTP", "21" will be filled in the
Target Port automatically.
 Domain Name
If the Domain Name is selected, you will see the following items
Domain Name - Here you can enter 4 domain names, either the
full name or the keywords (for example google). Any domain name
with keywords in it (www.google.com, www.google.cn) will be
blocked or allowed.
 Save
Click the Save button to save the changes.
 Back
Click the Back button to back to the previous page.
5.11.4 Schedule
Choose menu “Access Control > Schedule” screen as shown in Figure 5-11-4-1. The Schedule list is
necessary for the Access Control Rule.