User Manual

User Manual of WNAP-7206
-130-
 Add New…
Click the Add New… button to add a new entry to the table.
 Enable All
Click the Enable All button to enable all entries.
 Disable All
Click the Disable All button to disable all entries.
 Delete All
Click the Delete All button to delete all entries.
 Find
Click Find button to find existed entry you want.
5.14.2 ARP List
Choose menu “IP&MAC Binding > ARP List”, and then you can view and configure the ARP List in the screen
below shown in Figure 5-14-2-1.
Figure 5-14-2-1 ARP List
The page includes the following fields:
Object Description
 MAC Address
The MAC address of a controlled computer in the LAN.
 IP Address
The assigned IP address of a controlled computer in the LAN.
 Status
Indicates whether or not the MAC and IP addresses are bound.
 Configure
These buttons are for loading or deleting an item.
 Load - Load the item to the IP & MAC Binding list.
 Delete - Delete the item from the list.
 Bind All
Bind all current items. This option is only available when ARP
Binding is enabled and saved in the Binding Setting page.
 Load All
Load all items into the IP & MAC Binding list.
A
n item cannot be loaded to the IP & MAC Binding list if the IP address of the
item has been loaded before. Error warning will prompt as well. Likewise, "Load
All" only loads the items have no interference with the IP & MAC Binding list.