User Manual

107

Users Manual of XGS-6350-24X4C

Configuration Preparation

7.2

7.2.1 Accessing the Switch through HTTP

When accessing the switch through Web, please make sure that the applied browser complies with the

following requirements:

 HTML of version 4.0

 HTTP of version 1.1

 JavaScript

of version 1.5

What's more, please ensure that the main program file, running on a switch, supports Web access and your

computer has already connected the network in which the switch is located.

7.2.1.1 Initially Accessing the Switch

When the switch is initially used, you can use the Web access without any extra settings:

1. Modify the IP address of the network adapter and subnet mask of your computer to 192.168.0.1 and

255.255.255.0 respectively.

2. Open the Web browser and enter 192.168.0.254 in the address bar. It is noted that 192.168.0.254is the

default management address of the switch.

3. If the Internet Explorer browser is used, you can see the dialog box in figure 1. Both the original

username and the password are “admin”, which is capital sensitive.

Figure 1: ID checkup of WEB login

4. After successful authentication, the systematic information about the switch will appear on the IE

browser.

7.2.1.2 Upgrading to the Web-Supported Version

If your switch is upgraded to the Web-supported version during its operation and the switch has already

stored its configuration files, the Web visit cannot be directly applied on the switch. Perform the following

steps one by one to enable the Web visit on the switch: