User Manual

120
Users Manual of XGS-6350-24X4C
VLAN.
If you select the checkbox before a VLAN and then click “Delete”, the selected VLAN will be deleted.
By default, a VLAN list can display up to 100 VLAN items. If you want to configure
more VLANs through Web, please log on to the switch through the Console port or
Telnet, enter the global configuration mode and then run the “ip http web
max-vlan” command to modify the maximum number of VLANs that will be
displayed.
7.5.1.2 VLAN Settings
If you click "New" or “Edit” in the VLAN list, the VLAN configuration page appears, on which new VLANs can
be created or the attributes of an existent VLAN can be modified.
Figure 3: Revising VLAN configuration
If you want to create a new VLAN, enter a VLAN ID and a VLAN name; the VLAN name can be null.
Through the port list, you can set for each port the default VLAN , the VLAN mode (Trunk or Access), whether
to allow the entrance of current VLAN packets and whether to execute the untagging of the current VLAN
when the port works as the egress port.
When a port in Trunk mode serves as
an egress port, it will untag the default VLAN
by default.
7.5.2 PDP Configuration
7.5.2.1 Configuring the Global Attributes of PDP
If you click Layer 2 Config -> PDP Config in the navigation bar, the Global PDP Config page appears, as
shown in figure 4.