User Manual

123
Users Manual of XGS-6350-24X4C
An aggregation group is selectable when it is created but is not selectable when it is modified.
When a member port exists on the aggregation group, you can choose the aggregation mode to be static,
LACP active or LACP passive.
You can click “>>” and “<<” to delete and add a member port in the aggregation group.
7.5.5 STP Configuration
7.5.5.1 STP Status Information
If you click Layer 2 Config -> STP Config in the navigation bar, the STP Config page appears, as shown in
figure 10.
Figure 10: Configuring the global attributes of STP
The root STP configuration information and the STP port’s status are only-read.
On the local STP configuration page, you can modify the running STP mode by clicking the Protocol type
drop-down box. The STP modes include STP, RSTP and disabled STP.
The priority and the time need to be configured for different modes.
The change of the STP mode may lead to the interruption of the network.
7.5.5.2 Configuring the Attributes of the STP Port
If you click the "Configure RSTP Port" option, the “Configure RSTP Port” page appears.
Figure 11: Configuring the attributes of RSTP